HARTING, D-Sub Standard Series, Male Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
- RS-artikelnummer:
- 139-3676
- Tillv. art.nr:
- 09670008168
- Tillverkare / varumärke:
- HARTING
Mängdrabatt möjlig
Antal (1 rulle med 500 enheter)*
1 061,00 kr
(exkl. moms)
1 326,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 000 enhet(er) från den 22 december 2025
- Dessutom levereras 2 000 enhet(er) från den 29 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 500 - 1000 | 2,122 kr | 1 061,00 kr |
| 1500 - 2500 | 1,933 kr | 966,50 kr |
| 3000 - 4500 | 1,882 kr | 941,00 kr |
| 5000 + | 1,833 kr | 916,50 kr |
*vägledande pris
- RS-artikelnummer:
- 139-3676
- Tillv. art.nr:
- 09670008168
- Tillverkare / varumärke:
- HARTING
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | HARTING | |
| Gender | Male | |
| Contact Material | Brass | |
| Wire Size | 24 → 20 AWG | |
| Contact Plating | PdNi | |
| Termination Method | Crimp | |
| Contact Type | Pin | |
| Maximum Contact Resistance | ≤10MΩ | |
| Minimum Wire Size mm² | 0.25mm² | |
| Maximum Wire Size mm² | 0.56mm² | |
| Series | D-Sub Standard | |
| Current Rating | 6.5A | |
| Length | 14.48mm | |
| Maximum Wire Size AWG | 20AWG | |
| Minimum Wire Size AWG | 24AWG | |
| Välj alla | ||
|---|---|---|
Brand HARTING | ||
Gender Male | ||
Contact Material Brass | ||
Wire Size 24 → 20 AWG | ||
Contact Plating PdNi | ||
Termination Method Crimp | ||
Contact Type Pin | ||
Maximum Contact Resistance ≤10MΩ | ||
Minimum Wire Size mm² 0.25mm² | ||
Maximum Wire Size mm² 0.56mm² | ||
Series D-Sub Standard | ||
Current Rating 6.5A | ||
Length 14.48mm | ||
Maximum Wire Size AWG 20AWG | ||
Minimum Wire Size AWG 24AWG | ||
- COO (Country of Origin):
- DE
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
Standards
IEC 60 807