Weller Erem ESD Safe Oblique Cutters
- RS-artikelnummer:
- 239-4026
- Distrelec artikelnummer:
- 180-57-358
- Tillv. art.nr:
- 593AE
- Tillverkare / varumärke:
- Weller Erem
Antal (1 enhet)*
1 061,31 kr
(exkl. moms)
1 326,64 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 16 enhet(er) är redo att levereras
- Plus 1 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 1 061,31 kr |
*vägledande pris
- RS-artikelnummer:
- 239-4026
- Distrelec artikelnummer:
- 180-57-358
- Tillv. art.nr:
- 593AE
- Tillverkare / varumärke:
- Weller Erem
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Weller Erem | |
| Cutter Type | Oblique Cutters | |
| Materials Cut | Copper Wire, Hard Wire | |
| Overall Length | 115 mm | |
| ESD Safe | Yes | |
| Maximum Cutting Capacity | 1mm | |
| Cut Type | Flush | |
| Välj alla | ||
|---|---|---|
Brand Weller Erem | ||
Cutter Type Oblique Cutters | ||
Materials Cut Copper Wire, Hard Wire | ||
Overall Length 115 mm | ||
ESD Safe Yes | ||
Maximum Cutting Capacity 1mm | ||
Cut Type Flush | ||
RoHS-status: Undantagen
Angled Head Small Cable Cutters
Small angle cable cutters which are suitable for working on printed-circuit boards, component connections and can be used in both 90° and 180° applications. These cutters have a full flush cut and can be used on medium hard wire, stainless steel wire, material 1.4301. tensile strength 800 MPa. As well as soft wire, copper, aluminium, tensile strength 250 MPa.
These electronics cutters are manufactured from high quality machined tool steel. The cutters feature a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.
Versions available are:
239-4010 - Model 582E is designed for PCB component lead cutting, NATO and UK MOD approved 5110-99-256 52 58, 45 degree angle
239-4026 - Model 593AE is designed for rear cutting of DIP leads and dense PCBs, 30 degree angle
These electronics cutters are manufactured from high quality machined tool steel. The cutters feature a built-in internal stop and integral return spring to prevent blade overlapping and reduce operator fatigue. All cutters are supplied with soft grip foam rubber grips.
Versions available are:
239-4010 - Model 582E is designed for PCB component lead cutting, NATO and UK MOD approved 5110-99-256 52 58, 45 degree angle
239-4026 - Model 593AE is designed for rear cutting of DIP leads and dense PCBs, 30 degree angle
Applications:
Cable Cutters are tools designed with electricians in mind, but a reliable set of cable cutters should always be at hand. These tools are ideal for cutting and stripping wires of all shapes and sizes. Wire cutters feature ergonomic designs for comfort, confidence and safety of use. Speciality models are suitable for insulated wire cutting and use in Electrostatic Discharge (ESD) environments. Cable cutters are commonly used by:
• Electricians
• Gas engineers
• Telecommunication engineers
• Car mechanics
• DIY enthusiasts
• Electricians
• Gas engineers
• Telecommunication engineers
• Car mechanics
• DIY enthusiasts
Features:
High Precision tip cutter, bent
For cutting DIL contacts directly on the component
Practical rework tool
Perfect for densely printed boards
ESD safe
Non-reflecting surface
Series 500
Flush cut
For cutting DIL contacts directly on the component
Practical rework tool
Perfect for densely printed boards
ESD safe
Non-reflecting surface
Series 500
Flush cut