onsemi NCV84120DR2G, Current Sensor IC 8-Pin, SOIC
- RS-artikelnummer:
- 284-9052
- Tillv. art.nr:
- NCV84120DR2G
- Tillverkare / varumärke:
- onsemi
Mängdrabatt möjlig
Antal (1 förpackning med 5 enheter)*
106,18 kr
(exkl. moms)
132,725 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 2 495 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 5 - 45 | 21,236 kr | 106,18 kr |
| 50 - 95 | 18,30 kr | 91,50 kr |
| 100 - 495 | 15,86 kr | 79,30 kr |
| 500 - 995 | 13,956 kr | 69,78 kr |
| 1000 + | 12,678 kr | 63,39 kr |
*vägledande pris
- RS-artikelnummer:
- 284-9052
- Tillv. art.nr:
- NCV84120DR2G
- Tillverkare / varumärke:
- onsemi
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | onsemi | |
| Product Type | Current Sensor IC | |
| Package Type | SOIC | |
| Current Rating | 18 A | |
| Pin Count | 8 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 28V | |
| Maximum Supply Voltage | 41V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.75mm | |
| Series | NCV84120 | |
| Standards/Approvals | RoHS, REACH | |
| Length | 5mm | |
| Width | 3.9 mm | |
| Automotive Standard | AEC-Q100-011 | |
| Välj alla | ||
|---|---|---|
Brand onsemi | ||
Product Type Current Sensor IC | ||
Package Type SOIC | ||
Current Rating 18 A | ||
Pin Count 8 | ||
Mount Type Surface | ||
Minimum Supply Voltage 28V | ||
Maximum Supply Voltage 41V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.75mm | ||
Series NCV84120 | ||
Standards/Approvals RoHS, REACH | ||
Length 5mm | ||
Width 3.9 mm | ||
Automotive Standard AEC-Q100-011 | ||
The ON Semiconductor fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection features such as active inrush current management, over−temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated current sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and OFF state open load detection.
Short circuit protection with inrush current management
Very low standby current
Very low current sense leakage
Proportional load current sense
Current sense enable
Off state open load detection