Infineon TLE49421CHAMA2, Hall Effect Sensor IC 2-Pin, PG-SSO-2-4
- RS-artikelnummer:
- 258-4098P
- Tillv. art.nr:
- TLE49421CHAMA2
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal 10 enheter (levereras som en tejp)*
415,50 kr
(exkl. moms)
519,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 1 285 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 99 | 41,55 kr |
| 100 - 249 | 33,82 kr |
| 250 - 499 | 29,79 kr |
| 500 + | 29,01 kr |
*vägledande pris
- RS-artikelnummer:
- 258-4098P
- Tillv. art.nr:
- TLE49421CHAMA2
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor IC | |
| Quiescent Current | 7mA | |
| Bandwidth | 5kHz | |
| Package Type | PG-SSO-2-4 | |
| Current Rating | 16.8 mA | |
| Pin Count | 2 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 20V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 3.71mm | |
| Series | TLE4942 | |
| Length | 5.34mm | |
| Width | 1 mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor IC | ||
Quiescent Current 7mA | ||
Bandwidth 5kHz | ||
Package Type PG-SSO-2-4 | ||
Current Rating 16.8 mA | ||
Pin Count 2 | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 20V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 3.71mm | ||
Series TLE4942 | ||
Length 5.34mm | ||
Width 1 mm | ||
Standards/Approvals RoHS | ||
Automotive Standard AEC-Q100 | ||
The Infineon hall effect sensor IC is designed to provide information about rotational speed, direction of rotation, assembly position and limit air gap to modern vehicle dynamics control systems and ABS. The output has been designed as a two wire current interface based on a pulse width modulation principle. The sensor operates without external components and combines a fast power-up time with a low cut-off frequency. Excellent accuracy and sensitivity is specified for harsh automotive requirements as a wide temperature range, high ESD robustness and high EMC resilience.
Two-wire PWM current interface
Detection of rotation direction
Air gap diagnosis
Assembly position diagnosis
Dynamic self-calibration principle
Single chip solution
No external components needed
High sensitivity
South and north pole pre-induction possible
High resistance to piezo effects