Infineon TLE4941PLUSCXAMA1, Hall Effect Sensor IC 2-Pin, PG-SSO-2-53
- RS-artikelnummer:
- 258-4096
- Tillv. art.nr:
- TLE4941PLUSCXAMA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 enhet)*
31,02 kr
(exkl. moms)
38,78 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 238 enhet(er) från den 17 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 9 | 31,02 kr |
| 10 - 99 | 24,30 kr |
| 100 - 249 | 19,71 kr |
| 250 - 499 | 17,36 kr |
| 500 + | 17,14 kr |
*vägledande pris
- RS-artikelnummer:
- 258-4096
- Tillv. art.nr:
- TLE4941PLUSCXAMA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor IC | |
| Quiescent Current | 7mA | |
| Current Rating | 16.8 mA | |
| Package Type | PG-SSO-2-53 | |
| Bandwidth | 5kHz | |
| Pin Count | 2 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 20V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.95mm | |
| Series | TLE4941plusC | |
| Length | 5.34mm | |
| Standards/Approvals | RoHS | |
| Width | 3.64 mm | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor IC | ||
Quiescent Current 7mA | ||
Current Rating 16.8 mA | ||
Package Type PG-SSO-2-53 | ||
Bandwidth 5kHz | ||
Pin Count 2 | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 20V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Height 1.95mm | ||
Series TLE4941plusC | ||
Length 5.34mm | ||
Standards/Approvals RoHS | ||
Width 3.64 mm | ||
Automotive Standard AEC-Q100 | ||
The Infineon magnetic Hall effect sensor provides information about rotational speed to modern vehicle dynamics control systems and anti-lock braking systems. The output is designed as a two wire current interface. The device operates without external components and combines a fast power-up time with a low cut-off frequency. Thus the product is dedicated to meet harsh automotive requirements, excellent accuracy and sensitivity is specified over a wide temperature range, moreover robustness to ESD and EMC has been maximized. State-of-the art BiCMOS technology is used for monolithic integration of the active sensor areas and the signal conditioning circuitry.
Two-wire current interface
Dynamic self-calibration principle
Single chip solution
No external components needed
High sensitivity
South and north pole pre-induction possible
High resistive to piezo effects
relaterade länkar
- Infineon TLE4941PLUSCXAMA1 PG-SSO-2-53
- Infineon TLE49421CHAMA2 PG-SSO-2-4
- Infineon TLE4941CHAMA2 PG-SSO-2-4
- Infineon SMD Hall Effect Sensor Latch 3-Pin
- Infineon Through Hole Hall Effect Sensor 3-Pin
- IC Haus SMD Hall Effect Sensor 4.5-5.5 V, 6V
- IC Haus Hall Effect Sensor Square Body, 6V
- Infineon Surface Mount Hall Effect Sensor 3-Pin
