MPS MCS1800GS-12-P, Hall Effect Sensor IC 8-Pin, SOIC-8
- RS-artikelnummer:
- 337-954
- Tillv. art.nr:
- MCS1800GS-12-P
- Tillverkare / varumärke:
- MPS
Mängdrabatt möjlig
Antal (1 längd med 5 enheter)*
151,01 kr
(exkl. moms)
188,76 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 16 februari 2027
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per Längd* |
|---|---|---|
| 5 - 45 | 30,202 kr | 151,01 kr |
| 50 - 95 | 28,672 kr | 143,36 kr |
| 100 + | 26,588 kr | 132,94 kr |
*vägledande pris
- RS-artikelnummer:
- 337-954
- Tillv. art.nr:
- MCS1800GS-12-P
- Tillverkare / varumärke:
- MPS
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | MPS | |
| Offset Voltage | ±10 mV | |
| Product Type | Hall Effect Sensor IC | |
| Bandwidth | 100kHz | |
| Package Type | SOIC-8 | |
| Current Rating | 12.5 A | |
| Pin Count | 8 | |
| Mount Type | Surface Mount | |
| Minimum Supply Voltage | 0.1V | |
| Maximum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 6.2mm | |
| Width | 4.8 mm | |
| Series | MCS1800 | |
| Standards/Approvals | RoHS | |
| Height | 1.75mm | |
| Välj alla | ||
|---|---|---|
Brand MPS | ||
Offset Voltage ±10 mV | ||
Product Type Hall Effect Sensor IC | ||
Bandwidth 100kHz | ||
Package Type SOIC-8 | ||
Current Rating 12.5 A | ||
Pin Count 8 | ||
Mount Type Surface Mount | ||
Minimum Supply Voltage 0.1V | ||
Maximum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 6.2mm | ||
Width 4.8 mm | ||
Series MCS1800 | ||
Standards/Approvals RoHS | ||
Height 1.75mm | ||
- COO (Country of Origin):
- CN
The MPS International Ltd Linear Hall effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows current to flow close to the IC, which contains high accuracy Hall effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current.
4μs output rising time
Ratiometric output from supply voltage
Output proportional to AC or DC currents
Factory trimmed for accuracy
No magnetic hysteresis