MPS MCS1800GS-12-P, Hall Effect Sensor IC 8-Pin, SOIC-8
- RS-artikelnummer:
- 337-953
- Tillv. art.nr:
- MCS1800GS-12-P
- Tillverkare / varumärke:
- MPS
Antal (1 rulle med 500 enheter)*
12 685,50 kr
(exkl. moms)
15 857,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 19 februari 2027
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 500 + | 25,371 kr | 12 685,50 kr |
*vägledande pris
- RS-artikelnummer:
- 337-953
- Tillv. art.nr:
- MCS1800GS-12-P
- Tillverkare / varumärke:
- MPS
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | MPS | |
| Product Type | Hall Effect Sensor IC | |
| Offset Voltage | ±10 mV | |
| Current Rating | 12.5 A | |
| Bandwidth | 100kHz | |
| Package Type | SOIC-8 | |
| Pin Count | 8 | |
| Mount Type | Surface Mount | |
| Minimum Supply Voltage | 0.1V | |
| Maximum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Series | MCS1800 | |
| Width | 4.8 mm | |
| Length | 6.2mm | |
| Height | 1.75mm | |
| Välj alla | ||
|---|---|---|
Brand MPS | ||
Product Type Hall Effect Sensor IC | ||
Offset Voltage ±10 mV | ||
Current Rating 12.5 A | ||
Bandwidth 100kHz | ||
Package Type SOIC-8 | ||
Pin Count 8 | ||
Mount Type Surface Mount | ||
Minimum Supply Voltage 0.1V | ||
Maximum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Series MCS1800 | ||
Width 4.8 mm | ||
Length 6.2mm | ||
Height 1.75mm | ||
- COO (Country of Origin):
- CN
The MPS International Ltd Linear Hall effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows current to flow close to the IC, which contains high accuracy Hall effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current.
4μs output rising time
Ratiometric output from supply voltage
Output proportional to AC or DC currents
Factory trimmed for accuracy
No magnetic hysteresis
relaterade länkar
- Allegro Microsystems SOIC
- Allegro Microsystems ACS712ELCTR-20A-T SOIC
- Allegro Microsystems SOIC
- Allegro Microsystems ACS712ELCTR-05B-T SOIC
- ams OSRAM Surface Mount Hall Effect Sensor 8-Pin
- Analog Devices Surface Hall Effect Sensor 12 V 8-Pin
- MPS MP9486AGN-P, Converter 100V SOIC-8 8-Pin
- MPS MP9485GN-P, Converter 100V SOIC-8 8-Pin
