Texas Instruments Current Shunt Monitor Single 8-Pin SOT-23
- RS-artikelnummer:
- 709-8855P
- Tillv. art.nr:
- INA219AIDCNT
- Tillverkare / varumärke:
- Texas Instruments
Antal 1 enhet (levereras på en kontinuerlig remsa)*
21,59 kr
(exkl. moms)
26,99 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 03 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 21,59 kr |
*vägledande pris
- RS-artikelnummer:
- 709-8855P
- Tillv. art.nr:
- INA219AIDCNT
- Tillverkare / varumärke:
- Texas Instruments
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Texas Instruments | |
| Product Type | Current Shunt Monitor | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 5.5V | |
| CMRR - Common Mode Rejection Ratio | 120dB | |
| Number of Channels | 1 | |
| Supply Current | 5mA | |
| Mount Type | Surface | |
| Package Type | SOT-23 | |
| Pin Count | 8 | |
| Minimum Operating Temperature | -25°C | |
| Length | 2.9mm | |
| Width | 1.63 mm | |
| Series | INA219 | |
| Standards/Approvals | No | |
| Height | 1.1mm | |
| Automotive Standard | No | |
| Maximum Operating Temperature | 85°C | |
| Välj alla | ||
|---|---|---|
Brand Texas Instruments | ||
Product Type Current Shunt Monitor | ||
Power Supply Type Single | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 5.5V | ||
CMRR - Common Mode Rejection Ratio 120dB | ||
Number of Channels 1 | ||
Supply Current 5mA | ||
Mount Type Surface | ||
Package Type SOT-23 | ||
Pin Count 8 | ||
Minimum Operating Temperature -25°C | ||
Length 2.9mm | ||
Width 1.63 mm | ||
Series INA219 | ||
Standards/Approvals No | ||
Height 1.1mm | ||
Automotive Standard No | ||
Maximum Operating Temperature 85°C | ||
Current Sense Power / Current Monitors, Texas Instruments
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.