NCS21671DM200R2G onsemi Rail to Rail Current Shunt Monitor Single 10-Pin Micro10
- RS-artikelnummer:
- 284-9044P
- Tillv. art.nr:
- NCS21671DM200R2G
- Tillverkare / varumärke:
- onsemi
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
622,70 kr
(exkl. moms)
778,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 4 000 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 95 | 12,454 kr |
| 100 - 495 | 10,774 kr |
| 500 - 995 | 9,498 kr |
| 1000 + | 8,624 kr |
*vägledande pris
- RS-artikelnummer:
- 284-9044P
- Tillv. art.nr:
- NCS21671DM200R2G
- Tillverkare / varumärke:
- onsemi
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | onsemi | |
| Product Type | Current Shunt Monitor | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5.5V | |
| CMRR - Common Mode Rejection Ratio | 109dB | |
| Number of Channels | 1 | |
| Supply Current | 80A | |
| Mount Type | Surface | |
| Package Type | Micro10 | |
| Pin Count | 10 | |
| GBP - Gain Bandwidth Product | 40kHz | |
| Minimum Operating Temperature | -40°C | |
| Series | NCS21671 | |
| Standards/Approvals | RoHS, REACH | |
| Length | 0.086mm | |
| Width | 0.086 mm | |
| Height | 0.043mm | |
| Output Type | Rail to Rail | |
| Automotive Standard | AEC-Q100 | |
| Maximum Operating Temperature | 85°C | |
| Välj alla | ||
|---|---|---|
Brand onsemi | ||
Product Type Current Shunt Monitor | ||
Power Supply Type Single | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5.5V | ||
CMRR - Common Mode Rejection Ratio 109dB | ||
Number of Channels 1 | ||
Supply Current 80A | ||
Mount Type Surface | ||
Package Type Micro10 | ||
Pin Count 10 | ||
GBP - Gain Bandwidth Product 40kHz | ||
Minimum Operating Temperature -40°C | ||
Series NCS21671 | ||
Standards/Approvals RoHS, REACH | ||
Length 0.086mm | ||
Width 0.086 mm | ||
Height 0.043mm | ||
Output Type Rail to Rail | ||
Automotive Standard AEC-Q100 | ||
Maximum Operating Temperature 85°C | ||
The ON Semiconductor voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V. These parts can measure voltage across shunts at common mode voltages from −0.1 V to 40 V, independent of supply voltage. The low offset of the zero drift architecture enables current sensing with voltage drops across sense resistors as low as 10 mV full scale. An optional enable function is available to reduce current drain through the input pins and power supply pins to negligible levels when disabled. Two optional pins are included to simplify input filtering.
Rail to rail output capability
Low current consumption 80 A maximum
Enable pin to turn off input and power supply currents