onsemi Rail to Rail Current Shunt Monitor Single 10-Pin Micro10
- RS-artikelnummer:
- 284-9036P
- Tillv. art.nr:
- NCS21671DM025R2G
- Tillverkare / varumärke:
- onsemi
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
622,70 kr
(exkl. moms)
778,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 3 990 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 95 | 12,454 kr |
| 100 - 495 | 10,774 kr |
| 500 - 995 | 9,498 kr |
| 1000 + | 8,624 kr |
*vägledande pris
- RS-artikelnummer:
- 284-9036P
- Tillv. art.nr:
- NCS21671DM025R2G
- Tillverkare / varumärke:
- onsemi
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | onsemi | |
| Power Supply Type | Single | |
| Product Type | Current Shunt Monitor | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1.8V | |
| CMRR - Common Mode Rejection Ratio | 109dB | |
| Number of Channels | 1 | |
| Supply Current | 80A | |
| Mount Type | Surface | |
| Package Type | Micro10 | |
| Pin Count | 10 | |
| Minimum Operating Temperature | -40°C | |
| GBP - Gain Bandwidth Product | 40kHz | |
| Length | 0.086mm | |
| Standards/Approvals | RoHS, REACH | |
| Series | NCS21671 | |
| Width | 0.086 mm | |
| Height | 0.043mm | |
| Maximum Operating Temperature | 85°C | |
| Automotive Standard | AEC-Q100 | |
| Output Type | Rail to Rail | |
| Välj alla | ||
|---|---|---|
Brand onsemi | ||
Power Supply Type Single | ||
Product Type Current Shunt Monitor | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1.8V | ||
CMRR - Common Mode Rejection Ratio 109dB | ||
Number of Channels 1 | ||
Supply Current 80A | ||
Mount Type Surface | ||
Package Type Micro10 | ||
Pin Count 10 | ||
Minimum Operating Temperature -40°C | ||
GBP - Gain Bandwidth Product 40kHz | ||
Length 0.086mm | ||
Standards/Approvals RoHS, REACH | ||
Series NCS21671 | ||
Width 0.086 mm | ||
Height 0.043mm | ||
Maximum Operating Temperature 85°C | ||
Automotive Standard AEC-Q100 | ||
Output Type Rail to Rail | ||
The ON Semiconductor voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V. These parts can measure voltage across shunts at common mode voltages from −0.1 V to 40 V, independent of supply voltage. The low offset of the zero drift architecture enables current sensing with voltage drops across sense resistors as low as 10 mV full scale. An optional enable function is available to reduce current drain through the input pins and power supply pins to negligible levels when disabled. Two optional pins are included to simplify input filtering.
Rail to rail output capability
Low current consumption 80 A maximum
Enable pin to turn off input and power supply currents