INA190A4IRSWR Texas Instruments Voltage Current Sensing Amplifier Single 10-Pin UQFN
- RS-artikelnummer:
- 268-7492P
- Tillv. art.nr:
- INA190A4IRSWR
- Tillverkare / varumärke:
- Texas Instruments
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
935,20 kr
(exkl. moms)
1 169,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 2 905 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 95 | 18,704 kr |
| 100 - 245 | 15,836 kr |
| 250 + | 14,964 kr |
*vägledande pris
- RS-artikelnummer:
- 268-7492P
- Tillv. art.nr:
- INA190A4IRSWR
- Tillverkare / varumärke:
- Texas Instruments
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Texas Instruments | |
| Power Supply Type | Single | |
| Product Type | Current Sensing Amplifier | |
| Maximum Supply Voltage | 5V | |
| Minimum Supply Voltage | 1.7V | |
| CMRR - Common Mode Rejection Ratio | 150dB | |
| Number of Channels | 1 | |
| Supply Current | 65μA | |
| Package Type | UQFN | |
| Pin Count | 10 | |
| Minimum Operating Temperature | -55°C | |
| Standards/Approvals | RoHS | |
| Length | 1.4mm | |
| Automotive Standard | No | |
| Output Type | Voltage | |
| Maximum Operating Temperature | 150°C | |
| Välj alla | ||
|---|---|---|
Brand Texas Instruments | ||
Power Supply Type Single | ||
Product Type Current Sensing Amplifier | ||
Maximum Supply Voltage 5V | ||
Minimum Supply Voltage 1.7V | ||
CMRR - Common Mode Rejection Ratio 150dB | ||
Number of Channels 1 | ||
Supply Current 65μA | ||
Package Type UQFN | ||
Pin Count 10 | ||
Minimum Operating Temperature -55°C | ||
Standards/Approvals RoHS | ||
Length 1.4mm | ||
Automotive Standard No | ||
Output Type Voltage | ||
Maximum Operating Temperature 150°C | ||
The Texas Instruments current shunt monitors is also called as current sense amplifiers. This monitors are commonly used for overcurrent protection, precision current measurement for system optimization or in closed loop feedback circuits. This series of devices can sense drops across shunt resistors at common mode voltages from 0.2 V to 40 V independent of the supply voltage.
Bidirectional current sensing capability
Low side capable and ultra precise
Analog output
Low quiescent current is 50 micro amp