onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- RS-artikelnummer:
- 178-4576P
- Tillv. art.nr:
- NCS213RSQT2G
- Tillverkare / varumärke:
- onsemi
Mängdrabatt möjlig
Antal 500 enheter (levereras i en rulle)*
1 618,00 kr
(exkl. moms)
2 022,50 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 3 100 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 500 - 950 | 3,236 kr |
| 1000 + | 2,806 kr |
*vägledande pris
- RS-artikelnummer:
- 178-4576P
- Tillv. art.nr:
- NCS213RSQT2G
- Tillverkare / varumärke:
- onsemi
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | onsemi | |
| Power Supply Type | Single | |
| Product Type | Current Sensing Amplifier | |
| Minimum Supply Voltage | 2.2V | |
| Maximum Supply Voltage | 26V | |
| CMRR - Common Mode Rejection Ratio | 100dB | |
| Number of Channels | 1 | |
| Supply Current | 80μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| GBP - Gain Bandwidth Product | 90kHz | |
| Length | 2.2mm | |
| Height | 1mm | |
| Width | 1.35 mm | |
| Series | NCS213 | |
| Standards/Approvals | No | |
| Output Type | Rail to Rail | |
| Automotive Standard | No | |
| Maximum Operating Temperature | 125°C | |
| Välj alla | ||
|---|---|---|
Brand onsemi | ||
Power Supply Type Single | ||
Product Type Current Sensing Amplifier | ||
Minimum Supply Voltage 2.2V | ||
Maximum Supply Voltage 26V | ||
CMRR - Common Mode Rejection Ratio 100dB | ||
Number of Channels 1 | ||
Supply Current 80μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
GBP - Gain Bandwidth Product 90kHz | ||
Length 2.2mm | ||
Height 1mm | ||
Width 1.35 mm | ||
Series NCS213 | ||
Standards/Approvals No | ||
Output Type Rail to Rail | ||
Automotive Standard No | ||
Maximum Operating Temperature 125°C | ||
- COO (Country of Origin):
- MY
The NCS213R and NCV213R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 50 V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 μA of supply current.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty