Kubler K 07.20 Counter, 7 Digit
- RS-artikelnummer:
- 877-5513
- Tillv. art.nr:
- 1.130.200.056
- Tillverkare / varumärke:
- Kubler
Mängdrabatt möjlig
Antal (1 enhet)*
418,66 kr
(exkl. moms)
523,32 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 3 enhet(er) är redo att levereras
- Plus 5 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 15 enhet(er) från den 03 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 418,66 kr |
| 5 - 9 | 406,00 kr |
| 10 + | 389,20 kr |
*vägledande pris
- RS-artikelnummer:
- 877-5513
- Tillv. art.nr:
- 1.130.200.056
- Tillverkare / varumärke:
- Kubler
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Kubler | |
| Count Mode | Impulses | |
| Input Type | Voltage | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Mounting Type | Panel Mount | |
| Output / Interface | Voltage | |
| Count Direction | Up | |
| Digit Height | 4 mm | |
| Cutout Size | 30 x 13 mm | |
| Meter Type | Electromechanical | |
| Depth | 32.7mm | |
| Maximum Operating Temperature | +60°C | |
| Cutout Height | 15mm | |
| Cutout Width | 35mm | |
| Approvals | cULus, RoHS, UL | |
| Minimum Operating Temperature | -10°C | |
| Measurement Range | 0 → 9999999 | |
| Minimum Measurement | 0 | |
| Series | K 07.20 | |
| Välj alla | ||
|---|---|---|
Brand Kubler | ||
Count Mode Impulses | ||
Input Type Voltage | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Mounting Type Panel Mount | ||
Output / Interface Voltage | ||
Count Direction Up | ||
Digit Height 4 mm | ||
Cutout Size 30 x 13 mm | ||
Meter Type Electromechanical | ||
Depth 32.7mm | ||
Maximum Operating Temperature +60°C | ||
Cutout Height 15mm | ||
Cutout Width 35mm | ||
Approvals cULus, RoHS, UL | ||
Minimum Operating Temperature -10°C | ||
Measurement Range 0 → 9999999 | ||
Minimum Measurement 0 | ||
Series K 07.20 | ||
- COO (Country of Origin):
- DE
Type K07 - micro cumulative counter, 7-digit, front panel mounting
Compact, 7-digit counter
For front panel and print mounting
Minimal space required due to small size
Highly shock-resistant
Low energy consumption
Magnifying windows enable digits displayed to appear 4 mm in height
Visibility of display comparable with larger counters
DC voltage type with solder connections
For front panel and print mounting
Minimal space required due to small size
Highly shock-resistant
Low energy consumption
Magnifying windows enable digits displayed to appear 4 mm in height
Visibility of display comparable with larger counters
DC voltage type with solder connections
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.