Kubler K07 Counter, 7 Digit, 10Hz, 24 V dc
- RS-artikelnummer:
- 656-5935
- Tillv. art.nr:
- 1.139.200.418
- Tillverkare / varumärke:
- Kubler
Antal (1 enhet)*
326,24 kr
(exkl. moms)
407,80 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 38 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 326,24 kr |
*vägledande pris
- RS-artikelnummer:
- 656-5935
- Tillv. art.nr:
- 1.139.200.418
- Tillverkare / varumärke:
- Kubler
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Kubler | |
| Supply Voltage | 24 V dc | |
| Count Mode | Impulses | |
| Input Type | Voltage | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Mounting Type | Panel Mount | |
| Count Direction | Up | |
| Digit Height | 4 mm | |
| Maximum Count Frequency | 10Hz | |
| Maximum Operating Temperature | +85°C | |
| Minimum Operating Temperature | -10°C | |
| Series | K07 | |
| Välj alla | ||
|---|---|---|
Brand Kubler | ||
Supply Voltage 24 V dc | ||
Count Mode Impulses | ||
Input Type Voltage | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Mounting Type Panel Mount | ||
Count Direction Up | ||
Digit Height 4 mm | ||
Maximum Count Frequency 10Hz | ||
Maximum Operating Temperature +85°C | ||
Minimum Operating Temperature -10°C | ||
Series K07 | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- DE
Type K07 - micro cumulative counter, 7-digit, front panel mounting
Compact, 7-digit counter
For front panel and print mounting
Minimal space required due to small size
Highly shock-resistant
Low energy consumption
Magnifying windows enable digits displayed to appear 4 mm in height
Visibility of display comparable with larger counters
DC voltage type with solder connections
For front panel and print mounting
Minimal space required due to small size
Highly shock-resistant
Low energy consumption
Magnifying windows enable digits displayed to appear 4 mm in height
Visibility of display comparable with larger counters
DC voltage type with solder connections
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.