Kubler AK07.00 Counter, 7 Digit, 25Hz, 24 V dc
- RS-artikelnummer:
- 297-3039
- Tillv. art.nr:
- 1.130.000.033
- Tillverkare / varumärke:
- Kubler
Antal (1 enhet)*
281,22 kr
(exkl. moms)
351,52 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 58 enhet(er) är redo att levereras
- Plus 30 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 79 enhet(er) från den 13 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 281,22 kr |
*vägledande pris
- RS-artikelnummer:
- 297-3039
- Tillv. art.nr:
- 1.130.000.033
- Tillverkare / varumärke:
- Kubler
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Kubler | |
| Supply Voltage | 24 V dc | |
| Input Type | Voltage | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Mounting Type | Plug In | |
| Count Direction | Up | |
| Digit Height | 4 mm | |
| Maximum Count Frequency | 25Hz | |
| Series | AK07.00 | |
| Välj alla | ||
|---|---|---|
Brand Kubler | ||
Supply Voltage 24 V dc | ||
Input Type Voltage | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Mounting Type Plug In | ||
Count Direction Up | ||
Digit Height 4 mm | ||
Maximum Count Frequency 25Hz | ||
Series AK07.00 | ||
- COO (Country of Origin):
- DE
Kubler Digital Counter
The Kubler AK07.00 series digital counter is a 7-digit electromechanical base mount counter has 24VDC supply voltage. As a base mount counter with a very high level of shock resistance, it can be used for numerous diverse application areas. This counter has a maximum count frequency of 25Hz.
PCB, surface and DIN rail mounting
All the units are non-resettable and are continuously rated. Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals. The count rate of all products is 10Hz.
PCB, surface and DIN rail mounting
All the units are non-resettable and are continuously rated. Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals. The count rate of all products is 10Hz.
Features and Benefits
Low power consumption
suitable for battery operation
Non reset totalising counter
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
Operating temperature ranges between -20°C and 70°C
Non reset totalising counter
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
Operating temperature ranges between -20°C and 70°C
Applications
General quantity counting
Alarm systems
coin-operated machines
Electricity meters
Vending and slot machines
Photocopiers and medical equipment
Alarm systems
coin-operated machines
Electricity meters
Vending and slot machines
Photocopiers and medical equipment
Certifications
IP65 rated