Hi-Bond HB 938A Conductive Copper Tape, 19mm x 25m

  • RS-artikelnummer 832-6335
  • Tillv. art.nr HB 938A 25mm x 25m
  • Tillverkare / varumärke Hi-Bond
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): KR
Produktdetaljer

Hi-Bond 938A Embossed Copper Foil Tape

This 938A Embossed Copper Foil Tape from Hi-Bond features a conductive acrylic adhesive with a uniform dispersion of conductive particles. The embossed copper foil carrier is heat and cold resistant.

Applications:

Shielding or repair of signal cable
Blinding the end of knitted wire mesh of shielding cable
Shield leaking or invading electromagnetic waves
EMR/RFI shielding

Hi-Bond Tapes

Specifikationer
Attribute Value
Total Thickness 0.10mm
Foil Thickness 0.038mm
Width 19mm
Length 25m
Conductivity Conductive
Adhesion Strength 3.5 N/cm
Adhesive Material Acrylic
Material Plating None
Tensile Strength 63N/cm
Maximum Temperature Resistance +130°C
Minimum Temperature Resistance -30°C
Model Number HB 938A
5 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
603,96 kr
(exkl. moms)
754,95 kr
(inkl. moms)
Enheter
Per unit
1 +
603,96 kr
Related Products
35 micron copper foil coated with a non-conducting ...
Description:
35 micron copper foil coated with a non-conducting thermosetting solvent based acrylic adhesive supplied on a removable silicone release liner. Non-conductive acrylic adhesiveGood high and low temperature resistanceCan be easily solderedEasy unwind.
35μ tin clad copper foil coated tape with ...
Description:
35μ tin clad copper foil coated tape with an electrically conductive acrylic adhesive supplied on a removable silicone liner. Resistant to oils,chemicals, water and ozoneGood solder ability.
A very specific strip tape based on a ...
Description:
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder ...
35μ copper foil coated with a non-conductive acrylic ...
Description:
35μ copper foil coated with a non-conductive acrylic adhesive supplied on a removable silicone release liner. Provides good sheilding effectivenessGood soldering abilities.