Lapp ÖLFLEX SERVO FD Control Cable, 6 Cores, 2.5 to 1.5 mm² CSA 15 AWG, Screened, 50 m, Orange Polypropylene Sheath

Denna bild representerar endast produktgruppen

Se alla Sensor & Actuator Cables

Antal (1 rulle med 50 meter)*

11 320,85 kr

(exkl. moms)

14 151,06 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 2 enhet(er) från den 05 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Rulle(ar)
Per rulle
Per meter*
1 +11 320,85 kr226,417 kr

*vägledande pris

RS-artikelnummer:
800-3195
Tillv. art.nr:
0027960
Tillverkare / varumärke:
Lapp
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Lapp

Product Type

Control Cable

Series

ÖLFLEX SERVO FD

Number of Cores

6

Cross Sectional Area

2.5 to 1.5 mm²

Conductor Material

Copper

Jacket Material

Polypropylene

Jacket Colour

Orange

Screened/Unscreened

Screened

Cable Length

50m

Outside Diameter

13.4 mm

Voltage

1 kV

Conductor Type

Stranded

Minimum Operating Temperature

-40°C

Standards/Approvals

IEC 60332-1-2

Maximum Operating Temperature

90°C

American Wire Gauge

15AWG

Fire Behaviour

Halogen Free

COO (Country of Origin):
DE

LAPP Control Cable, PUR Sheath Material, 13.4mm Outer Diameter - ÖLFLEX SERVO FD Series - 0027960


Safely run operating signals between your servo system and electric motor with this control cable from LAPP. It's designed for use with a rotating machine component to transmit increased speed and acceleration to your equipment. The conductors come with a robust copper braid screen that shields the signals from EMI. Thanks to the tough PUR outer jacket, the cable stands up to wear, abrasion and chemicals.

Features & Benefits


• PP core insulation for protection against electrical hazards

• Copper wires are highly conductive for reliable current transmissions

Applications


• HVAC systems

• Packaging facilities

• Assembly plants

What's the speed and acceleration capacity of this cable?


When used in a power chain, this cable can transmit signals for travel speeds of up to 5m/s and acceleration of up to 50m/s².

Ölflex Servo 796CP


The Ölflex Servo 796CP cable allows much faster speed and accelerations which increases the economic efficiency of machines and is also slimmer and space saving. Ideal for use with servomotor drive systems from leading manufacturers. The cables modified design of the control core pairs means that the longitudinal voltage drop is lower. It also permits considerably higher operating voltages in the auxiliary circuits

Features and Benefits


• Extra-fine wire strand made of bare copper wires (class 6)

• Core insulation: polypropylene (PP)

• Individual design depending on the item: power cores with or without one pair, or with two control core pairs, in pairs, with screening, twisted together in short lay lengths

• Non-woven wrapping

• Tinned-copper braiding

• PUR outer sheath, orange (RAL 2003)

• Dynamic performance in power chains: Acceleration up to 50 m/s². Travel speeds up to 5 m/s. Travel distances up to 100 m.

• Low-capacitance design: this may result in lower EMI interference, depending on the drive’s electrical operating conditions.

• Halogen-free materials

• Flame retardancy: UL/CSA

Applications


• Connecting cable between servo controller and motor

• In power chains or moving machine parts

• For use in assembling and pick-and-place machinery

• Wet areas of machine tools and transfer lines

• Assembly lines, production lines

• All kinds of machines

• Dynamic motion sequences

Standards

UL, CSA, VW-1, FT1, EN60332-1-2, VDE

relaterade länkar