Senaste sökningar

    Schneider Electric TeSys K LP1K Contactor, 24 V dc Coil, 3 Pole, 9 A, 4 kW, 3NO

    RS-artikelnummer:
    609-7864
    Tillv. art.nr:
    LP1K0901BD
    Tillverkare / varumärke:
    Schneider Electric
    Schneider Electric
    Se alla Contactors
    102 I lager för avsändande samma dag
    260 Inom 1 arbetsdag(ar) (UK lager)
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    454,99 kr

    (exkl. moms)

    568,74 kr

    (inkl. moms)

    EnheterPer unit
    1 +454,99 kr
    RS-artikelnummer:
    609-7864
    Tillv. art.nr:
    LP1K0901BD
    Tillverkare / varumärke:
    Schneider Electric

    Lagstiftning och ursprungsland


    Produktdetaljer

    Schneider Electric LP1K TeSys K Miniature Contactors


    TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP1K range are DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience.


    Features and Benefits


    • Built-in auxiliary contacts for added switching capability
    • Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
    • Can be panel mounted with screws or DIN Rail mounted
    • Coil with rectifier incorporated
    • Easily installed accessories
    • Instantaneous auxiliary contact
    • Flexible control circuit to suit a wide range of applications
    • High-fault short circuit current ratings provide the flexibility to select any component


    What does the utilisation category AC1 and AC3 mean for the TeSys contactors?


    Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

    AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

    AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.

    Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.


    Are the TeSys K contactors suitable for applications in AC4 usage?


    The LP1K series is suitable up to a maximum of 440 V ac in category AC4.


    Is the TeSys K range a double break pole type contactor?


    Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.


    LP1K0901BD Schneider Electric LP1K TeSys K Miniature Contactor.


    The LP1K0901BD is a miniature 3 pole contactor featuring a 24 V dc operating coil, an AC-3 full load current of 9 A and a normally closed auxiliary contact.


    • LP1K Contactor.

    • Motor Control, Resistive Load.

    • Category AC-4, AC-3, AC-1.

    • [Ue] rated operational voltage Power circuit: 690 V AC 50/60 Hz, Signalling circuit: <= 690 V AC 50/60 Hz.

    • [Ie] rated operational current 20 A (at 50° C) <= 440 V AC AC-1 for power circuit, 9 A at <= 440 V AC AC-3 for power circuit, 16 A (at 70° C) at 690 V AC AC-1 for power circuit.

    • Auxiliary Contact 1 NC.

    • Category III.

    • Rail and Plate mounting.

    • Flame resistant V1 conforming to UL 94, Requirement 2 conforming to NF F 16-101, Requirement 2 conforming to NF F 16-102.

    • Screw Clamp terminal connection.

    • Breaking capacity 110 A at 415 V conforming to IEC 60947, 110 A at 440 V conforming to IEC 60947, 80 A at 500 V conforming to IEC 60947, 110 A at 220...230 V conforming to IEC 60947, 110 A at 380...400 V conforming to IEC 60947, 70 A at 660...690 V conforming to IEC 60947.

    • Protection IP2x conforming to VDE 0106.

    • Weight 0.225 kg.


    Approvals

    CSA, UL.

    Standards

    VDE 0660, BS 5424, NF C 63-110, IEC 60947.


    Specifikationer

    AttributeValue
    Coil Voltage24 V dc
    Number of Poles3
    Contact Current Rating9 A
    Power Rating4 kW
    Normal State Configuration3NO
    Contact Voltage Rating600 V ac
    RangeTeSys K
    SeriesLP1K
    Number Of Auxiliary Contacts1
    Terminal TypeScrew
    Width45mm
    Depth56.8mm
    Maximum Operating Temperature+50°C
    Minimum Operating Temperature-25°C
    Length57.91mm
    102 I lager för avsändande samma dag
    260 Inom 1 arbetsdag(ar) (UK lager)
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    454,99 kr

    (exkl. moms)

    568,74 kr

    (inkl. moms)

    EnheterPer unit
    1 +454,99 kr