Schneider Electric Tesys D LC1D 4 Pole Contactor, 4NO, 25 A, 230 V ac Coil

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): ID
Produktdetaljer

Schneider Electric LC1D TeSys D Contactors

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Is the TeSys D range a double break pole type contactor?

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1DT25P7 Contactor

The Schneider Electric LC1DT25P7 model is a 4 pole contactor featuring a 230 V ac operating coil, with an AC-3 full load current rating of 25 A.

Specifikationer
Attribute Value
Coil Voltage 230 V ac
Number of Poles 4
Contact Current Rating 25 A
Range TeSys D
Series LC1D
Normal State Configuration 4NO
Contact Voltage Rating 690 V ac
Number Of Auxiliary Contacts 2
Terminal Type Screw
Depth 90mm
Maximum Operating Temperature +60°C
Length 85mm
Width 45mm
Minimum Operating Temperature -5°C
47 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
393,65 kr
(exkl. moms)
492,06 kr
(inkl. moms)
Enheter
Per unit
1 +
393,65 kr
Related Products
Four main contacts and screw terminals, safe from ...
Description:
Four main contacts and screw terminals, safe from touch access to VDE 0106 Part 100Maximum switching current 20A @ 4kW ac/dc AC1 (20A), AC3 (8.4A)Operating temperature range –25 to +55 °CHum-free constructionCompact design (62 x 36 x 59mm) (H x ...
Rated insulation voltage UI: 690VRated free air thermal ...
Description:
Rated insulation voltage UI: 690VRated free air thermal current 10AAll contacts are highly conductiveScrew fixing or 35mm DIN rail attachmentIP20 finger safe terminal protection.
Suitable for use in any climateScrew and snap-on ...
Description:
Suitable for use in any climateScrew and snap-on mounting onto 35mm standard mounting railIdentification number and letter for switching elements 31 EAmbient temperature during operating phase -25 → 55 °C.
X Start is the latest generation of Contactors ...
Description:
X Start is the latest generation of Contactors from Moeller, based on the tried and tested DIL series. This generation of modular Contactors benefit from the advances in technology for motor switching and control, which in turn gives the user ...