LP311D Texas Instruments, Comparator, Open Collector/Emitter O/P, 1.2μs 5 → 28 V 8-Pin SOIC

RS-artikelnummer:: 517-1567
Tillv. art.nr:: LP311D
Tillverkare / varumärke:: Texas Instruments

LP311D Texas Instruments, Comparator, Open Collector/Emitter O/P, 1.2μs 5 → 28 V 8-Pin SOIC

Mängdrabatt möjlig

Antal (1 förpackning med 10 enheter)*

131,94 kr

(exkl. moms)

164,92 kr

(inkl. moms)

Lagerinformation är för närvarande otillgänglig

Enheter	Per enhet	Per förpackning*
10 - 90	13,194 kr	131,94 kr
100 - 240	11,211 kr	112,11 kr
250 - 990	9,901 kr	99,01 kr
1000 +	8,87 kr	88,70 kr

*vägledande pris

RS-artikelnummer:: 517-1567
Tillv. art.nr:: LP311D
Tillverkare / varumärke:: Texas Instruments

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Texas Instruments
	Comparator Type	Low Power
	Mounting Type	Surface Mount
	Package Type	SOIC
	Power Supply Type	Dual, Single
	Output Type	Open Collector/Emitter
	Number of Channels per Chip	1
	Typical Response Time	1.2µs
	Pin Count	8
	Typical Single Supply Voltage	5 → 28 V
	Dimensions	4.9 x 3.91 x 1.58mm
	Length	4.9mm
	Width	3.91mm
	Height	1.58mm
	Typical Dual Supply Voltage	±12 V, ±3 V, ±5 V, ±9 V
	Maximum Operating Temperature	+70 °C
	Minimum Operating Temperature	0 °C
	Typical Voltage Gain	100 dB

	Välj alla
	Brand Texas Instruments
	Comparator Type Low Power
	Mounting Type Surface Mount
	Package Type SOIC
	Power Supply Type Dual, Single
	Output Type Open Collector/Emitter
	Number of Channels per Chip 1
	Typical Response Time 1.2µs
	Pin Count 8
	Typical Single Supply Voltage 5 → 28 V
	Dimensions 4.9 x 3.91 x 1.58mm
	Length 4.9mm
	Width 3.91mm
	Height 1.58mm
	Typical Dual Supply Voltage ±12 V, ±3 V, ±5 V, ±9 V
	Maximum Operating Temperature +70 °C
	Minimum Operating Temperature 0 °C
	Typical Voltage Gain 100 dB

ESD Control Selection Guide V1

LP series Low Power Comparators

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

LP311D Texas Instruments, Comparator, Open Collector/Emitter O/P, 1.2μs 5 → 28 V 8-Pin SOIC

LP series Low Power Comparators

relaterade länkar