Texas Instruments 1-Channel Comparator Open Collector O/P, 0.2 μs 36 V 9 V 8-Pin SOIC

Se alla Comparators
Mängdrabatt möjlig

Antal (1 rör med 95 enheter)*

1 622,22 kr

(exkl. moms)

2 027,775 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 1 710 enhet(er) från den 26 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per Rør*
95 - 9517,076 kr1 622,22 kr
190 - 38013,66 kr1 297,70 kr
475 - 85512,808 kr1 216,76 kr
950 +11,953 kr1 135,54 kr

*vägledande pris

RS-artikelnummer:
121-8868
Tillv. art.nr:
LM311M/NOPB
Tillverkare / varumärke:
Texas Instruments
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Texas Instruments

Product Type

Comparator

Comparator Type

General Purpose

Mount Type

Surface

Package Type

SOIC

Output Type

Open Collector

Number of Channels

1

Typical Response Time

0.2μs

Pin Count

8

Minimum Supply Voltage

9V

Maximum Supply Voltage

36V

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Height

1.45mm

Length

4.9mm

Width

3.9 mm

Standards/Approvals

No

Supply Current

7.5mA

Automotive Standard

No

COO (Country of Origin):
GB

LMx11 family Single Comparators


The LM111, LM211 and LM311 from Texas Instruments are differential input voltage comparators with a wide operating voltage range and 200 ns response time. The inputs of these devices can be isolated from system ground and the uncommitted outputs can drive loads referred to either supply rail or ground. These single comparators are provided with balancing and strobe capability.

Comparators, Texas Instruments


Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

relaterade länkar