FTDI Chip Type B FT232RQ Evaluation Module UB232R

The FTDI Chip USB Mini-B to UART evaluation module is the smallest USB to serial development kit in the FTDI product range. To minimise the size of the module, this kit uses a standard USB mini-B connector. It is ideal for new development purposes as well as a platform for adding a USB interface to existing product designs. This module is based on the FTDI FT232RQ USB to Serial UART IC which handles all the USB signalling and protocols. It requires USB drivers used to make the FT232R on the UB232R appear as a virtual COM port (VCP). This then allows the user to communicate with the USB interface via a standard PC serial emulation port.

Reduced development time
Rapid integration into existing systems
USB powered, no external power supply needed
Entire USB protocol handled by USB module
Small USB Type-B connector to minimise PCB real estate usage
Data transfer rates from 300baud to 3Mbaud at TTL level
Lower Operating (15mA) and USB suspend mode current (70μA)
Support for USB suspend and resume
UHCI/OHCI/EHCI host controller compatible
USB 2.0 full speed compatible
Operating temperature ranges between -40°C and 85°C

Rapid USB integration into existing electronic systems
Prototyping platform for USB interface on new systems
USB Instrumentation integration
PCB real estate sensitive designs integrating the smallest FTDI USB module available

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007