ITT Cannon Female Crimp Circular Connector Contact, Contact Size 20, Wire Size 20 AWG
- RS-artikelnummer:
- 485-855
- Tillv. art.nr:
- 192991-0497
- Tillverkare / varumärke:
- ITT Cannon
Mängdrabatt möjlig
Antal (1 förpackning med 10 enheter)*
217,11 kr
(exkl. moms)
271,39 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 960 enhet(er) från den 15 december 2025
- Dessutom levereras 20 enhet(er) från den 15 december 2025
- Dessutom levereras 4 190 enhet(er) från den 26 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 10 - 10 | 21,711 kr | 217,11 kr |
| 20 - 50 | 21,056 kr | 210,56 kr |
| 60 + | 20,126 kr | 201,26 kr |
*vägledande pris
- RS-artikelnummer:
- 485-855
- Tillv. art.nr:
- 192991-0497
- Tillverkare / varumärke:
- ITT Cannon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | ITT Cannon | |
| Gender | Female | |
| Contact Size | 20 | |
| Wire Size | 20 AWG | |
| Termination Method | Crimp | |
| Series | QM | |
| For Use With | TNM Connector | |
| Current Rating | 13A | |
| Length | 18.2mm | |
| Contact Plating | Gold | |
| Voltage Rating | 250 V ac | |
| Contact Material | Brass | |
| Maximum Contact Resistance | 5mΩ | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | +105°C | |
| Mounting Type | Chassis Mount | |
| Välj alla | ||
|---|---|---|
Brand ITT Cannon | ||
Gender Female | ||
Contact Size 20 | ||
Wire Size 20 AWG | ||
Termination Method Crimp | ||
Series QM | ||
For Use With TNM Connector | ||
Current Rating 13A | ||
Length 18.2mm | ||
Contact Plating Gold | ||
Voltage Rating 250 V ac | ||
Contact Material Brass | ||
Maximum Contact Resistance 5mΩ | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature +105°C | ||
Mounting Type Chassis Mount | ||
Three Piece Inserts (contacts)
Machined construction
Gold plated inserts
Resistant to damage from misalignment and the use of test probes
Colour-coded retention springs for easy identification
Current rating 13A
Gold plated inserts
Resistant to damage from misalignment and the use of test probes
Colour-coded retention springs for easy identification
Current rating 13A
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types