Dold 230V DIN Rail Control Station Switch

Se alla Circuit Trips

Antal (1 enhet)*

1 110,95 kr

(exkl. moms)

1 388,69 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 2 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 110,95 kr

*vägledande pris

RS-artikelnummer:
240-9263
Tillv. art.nr:
IK8805.01 AC50Hz 230V
Tillverkare / varumärke:
Dold
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Dold

Current Rating

16 A

Product Type

Control Station Switch

Series

IK 8805

Mount Type

DIN Rail

Standards/Approvals

CE, IEC/EN 60 669

Control Voltage

230V

COO (Country of Origin):
DE

IK8805 - Remote switch for central circuit


The IK8805 remote switch can be used to implement central circuits with which several load groups can be switched on and off from a central position.

Push-button action

Switch position indication

Optional contact assignments 1 NO or 1 CO

Compact design: 17.5 mm overall width

Design and function


This centrally switchable remote switch operates on the principle of the acceleration relay. After a pulse is applied to the electromagnet, the contact system changes over and retains the switch position until the next pulse follows. Depending on the device version, a group with multiple loads can be switched off with this remote switch. Each load group requires a remote switch, which can be actuated via both an external switch and a central switch. If remote switches are combined into a central circuit, any number of load groups can be centrally switched on and off.

The red indicator on the front side of the device is visible if contacts 13 → 14 or 11 → 14 are closed.

Note


The IK8805 remote switch is designed for pulse operation!

When a central circuit is being constructed, it is essential for the IK8805 to be connected to the same phase

The central on and off buttons and the external switch must be connected to the same phase

Schneider Electric Modular Contactors


Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular enclosures.

relaterade länkar