Seeit SUPERPRO-6100 SUPERPRO-6100, High Speed Universal Stand Alone Programmer for ARM9 32 bit MCU

SUPERPRO-6100, Universal Programmer ZIF48 Socket Expandable to 144 Pins, USB 2.0 Port or Stand-Alone Mode

The SuperPro-6100 is an universal programmer equipped with ARM9 processor in USB 2.0 interface. Equipped with a 48-pin ZIF socket it can program over 88000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. Additionally, it can program components up to 144 programmable pins drivers thanks to it interchangeable socket. An LCD display screen of 20 x 2 characters as well as a keypad allow to use this programmer in stand-alone mode. In Stand-Alone mode of the SuperPro-6000, you can download and add numerous algorithms using the optional compact Flash card (512Mb or 1Gb) inserted in the back of the programmer.
It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device.
An optional ISP adapter can assist to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64-Bit). It allows advanced production functions such as automatic programming as soon as the device is detected, verification of the device ID and automatic generation of serial numbers in the device.

Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller
Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more
Tests and Detects incorrect insertion of the device and defective pin
protected against short circuits and over-voltages
Computer interface with USB 2.0
AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W
Dimensions: 145 x 210 x 95 mm, Weight: 1.6Kg

Kit Contents

Programmer with 48-pins ZIF socket
Power pack 90-260Vac to 12Vdc
USB-B to USB-A cable
Software on CD-ROM
User manual in English and French