ProMinent pH1, IP65 Probe

  • RS-artikelnummer 531-292
  • Tillv. art.nr 150702
  • Tillverkare / varumärke ProMinent
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

ProMinent PH Sensor

The ProMinent PH sensor is a high tech device used to monitor and control pulsing liquids. It helps in online measurement and adjustment of pH values that must be as accurate, fast and reliable as possible. The pH sensor has of range 1 to 12. The pH sensor is optimised for use in portable water treatment, swimming pools and hot tubs at up to 60°C/3 bar. The production of these pH sensors is subject to very strict quality controls (the example, in accordance with RoHS guidelines). Routine steps are automated, but critical steps are carried out manually under expert supervision for optimum reproducible quality and cost reduction.
Product Application Information:
This pH sensor has been optimised for use in potable water treatment, swimming pools and hot tubs at up to 60°C/3 bar.

Features and Benefits

Precise and reliable pH measurement enables efficient processes and maximum process reliability
Wide range of special versions for fitting length, cable length, and plugs for made-to-measure connection to your process
SN6 plug-in head electrical connection
Glass sensor shaft
Vertical up to 25° fitting position
Fitting length 120 ±3mm
12mm shaft diameter
Ceramic diaphragm
Maximum pressure is 3.0bar
Minimum conductivity is 150μS/cm
Electrolyte gel containing potassium chloride

Applications

Chemical processes
Chemically contaminated water
Swimming pool water, potable water
Process water
Cooling water, waste water
Seawater
Suspensions, sludge, and emulsions
Exhaust air scrubber, semiconductor industry, and electroplating

Certifications

IP65 rated

Specifikationer
Attribute Value
Product Type Sensor
Monitored Properties PH
Buffer Solution Type PH1
IP Rating IP65
12 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 029,35 kr
(exkl. moms)
2 536,69 kr
(inkl. moms)
Enheter
Per unit
1 - 4
2 029,35 kr
5 - 9
1 948,17 kr
10 +
1 867,02 kr
Related Products
All sensors require consumables such as buffer and ...
Description:
All sensors require consumables such as buffer and cleaning solutions to keep them functioning reliably. • Membrane caps for types: CLE 2.2, CLE 3, CDE 1.2, CDE 2, OZE 2 and OZE 3.
All sensors require consumables such as buffer and ...
Description:
All sensors require consumables such as buffer and cleaning solutions to keep them functioning reliably. • Membrane caps for types: CLE 2.2, CLE 3, CDE 1.2, CDE 2, OZE 2 and OZE 3.
The proven diaphragm-covered standard sensor for free chlorine ...
Description:
The proven diaphragm-covered standard sensor for free chlorine CLE3 is used to monitor or control all types of clear water. The variant CLE3.1 is especially suitable for an excess of combined chlorine, the calculation of combined chlorine from the measurement ...
A buffer solution is an aqueous solution consisting ...
Description:
A buffer solution is an aqueous solution consisting of a mixture of a weak acid and its conjugate base, or conversely. Its pH changes little when a small amount of strong acid or base is added to it. Buffer solutions ...