Senaste sökningar

    RS PRO 75VA 2 Output Chassis Mounting Transformer, 24V ac, IEC 61558-2-6

    RS-artikelnummer:
    504-060
    Tillverkare / varumärke:
    RS PRO
    RS PRO
    Se kategorien
    63 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    532,94 kr

    (exkl. moms)

    666,18 kr

    (inkl. moms)

    EnheterPer unit
    1 - 24532,94 kr
    25 +488,13 kr
    RS-artikelnummer:
    504-060
    Tillverkare / varumärke:
    RS PRO
    COO (Country of Origin):
    PL

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    PL

    Produktdetaljer

    RS PRO Chassis Frame Mount Panel Transformer


    It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications we developed to support various applications, such as electromagnetic, relays , pumps or heating elements.

    .

    The general concept of Chassis Mounting Transformers is around the usage of magnetic induction between coils to convert current and or voltage levels without changing the frequency.

    Today, we are proudly introducing our own branded RS PRO Mains Transformer, packed in a chassis mount configuration. Our chassis type Mount Transformer provides a primary voltage rating of 230 V ac and power rating of 24 VA for exceptional isolating qualities. The two separate secondary windings can be connected either in series or parallel to give a wide range of output voltage and current options.

    Features and Benefits


    • Chassis mounting frame construction low voltage Mains Transformer with a single 230 Vac, 50/60 Hz primary winding

    • The construction of our primary Mains provides double section bobbin fully shrouded

    • Our Chassis has a full varnish impregnation

    • Multi-hole frame fixing

    • The Transformer has a solder tag termination

    • 100% electrical and flash tested following BS3535 and EN 60742 regulations

    • The magnetic field that links both primary and secondary windings

    Applications


    Chassis type has a variety of applications where the Mains Transformer is used, particularly in:

    • Electromagnetic applications

    • Electronic and electrical control systems

    • relays

    • Pumps

    • Speed changers

    • heating elements.


    Why RS PRO?


    RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.

    Note

    Optional terminal shrouds for 75 VA and 100 VA (503-928)

    Approvals

    8888

    Standards

    BS3535; EN 60 742


    Laminated Frame 230Vac Primary 75VA to 200VA (Multi Tapped)


    Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding.


    Double section bobbin construction
    Fully shrouded bobbins
    Full varnish impregnation
    Multi-hole frame fixing
    Solder tag terminations
    100% electrical and flash tested
    Tested in accordance with BS3535 and EN 60 742

    Specifikationer

    AttributeValue
    Primary Voltage Rating230V ac
    Secondary Voltage Rating24V ac
    Power Rating75VA
    Number of Outputs2
    Mounting TypeChassis
    Length79mm
    Width75mm
    Depth65mm
    Dimensions79 x 75 x 65mm
    Fixing Hole Diameter4.7 x 7.9mm
    Weight1.5kg
    Minimum Operating Frequency50Hz
    Standards MetIEC 61558-2-6
    Maximum Operating Frequency60Hz
    63 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    532,94 kr

    (exkl. moms)

    666,18 kr

    (inkl. moms)

    EnheterPer unit
    1 - 24532,94 kr
    25 +488,13 kr