Microchip Technology MCP2003B-E/SN, LIN Transceiver 20kBd 1-Channel, 8-Pin SOIC

  • RS-artikelnummer 177-1617
  • Tillv. art.nr MCP2003B-E/SN
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, DFN and SOIC packages MCP2003-LIN-compatible driver with WAKE pin MCP2004-LIN-compatible driver with FAULT/TXE pin. This device provides a bidirectional, half-duplex communication physical interface. The device is short circuit and overtemp protected by internal circuitry. The device has been specifically designed to operate in the automotive operating environment.

Support Baud Rates up to 20 Kbaud with LIN-compatible output driver
43V load dump protected
Very low EMI Very high ESD immunity
>20kV on VBB
>14kV on LBUS
Very high immunity to RF disturbances
Wide supply voltage, 6.0V - 27.0V continuous
Extended Temperature Range: -40 to +125°C
Interface to PIC® EUSART and standard USARTs
Local Interconnect Network (LIN) bus pin:
Internal pull-up resistor and diode
Protected against battery shorts
Protected against loss of ground
High current drive
Automatic thermal shutdown

Specifikationer
Attribute Value
Maximum Data Rate 20kBd
Number of Transceivers 1
Maximum Supply Current 1 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 4.9 x 3.9 x 1.5mm
Length 4.9mm
Width 3.9mm
Height 1.5mm
Maximum Operating Supply Voltage 30 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Minimum Operating Supply Voltage 5.5 V
300 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tube of 100)
4,738 kr
(exkl. moms)
5,922 kr
(inkl. moms)
Enheter
Per unit
Per Tube*
100 +
4,738 kr
473,80 kr
Related Products
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
The MCP2561/2FD is a Microchip Technology Inc. second ...
Description:
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum ...
Autobaud ModeShort-Circuit ProtectionHigh-Speed Operation Up to 1MbpsSlope-Control ModeLow-Current ...
Description:
Autobaud ModeShort-Circuit ProtectionHigh-Speed Operation Up to 1MbpsSlope-Control ModeLow-Current Standby ModeThermal ShutdownTransmit Data Dominant Timeout±6kV Human Body Model ESD ProtectionGreater than ±12V Common-Mode Range ApplicationsDevice Net NodesHVACIndustrial NetworksTelecom.
The 7100A device is an Ethernet controller SoC ...
Description:
The 7100A device is an Ethernet controller SoC featuring an 'un-attackable' hardware network engine for preventing network attacks such as flooding, spoofing and injection. The W5200 device does not have the on-chip microcontroller and needs to be connected to an ...