Microchip ATA6561-GAQW-N, CAN Transceiver 5Mbps, 8-Pin SOIC
- RS-artikelnummer:
- 187-1854P
- Tillv. art.nr:
- ATA6561-GAQW-N
- Tillverkare / varumärke:
- Microchip
Mängdrabatt möjlig
Antal 30 enheter (levereras på en kontinuerlig remsa)*
140,22 kr
(exkl. moms)
175,26 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 2 895 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 30 - 90 | 4,674 kr |
| 105 + | 4,435 kr |
*vägledande pris
- RS-artikelnummer:
- 187-1854P
- Tillv. art.nr:
- ATA6561-GAQW-N
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Maximum Data Rate | 5Mbps | |
| Number of Transceivers | 1 | |
| IC Type | CAN Transceiver IC | |
| Power Down Mode | Standby | |
| Maximum Supply Current | 12 μA, 3 mA, 70 mA | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Dimensions | 4.9 x 3.9 x 1.5mm | |
| Length | 4.9mm | |
| Width | 3.9mm | |
| Height | 1.5mm | |
| Maximum Operating Supply Voltage | 5.5 V | |
| Minimum Operating Supply Voltage | 4.5 V | |
| Maximum Operating Temperature | +150 °C | |
| Automotive Standard | AEC-Q100 | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Maximum Data Rate 5Mbps | ||
Number of Transceivers 1 | ||
IC Type CAN Transceiver IC | ||
Power Down Mode Standby | ||
Maximum Supply Current 12 μA, 3 mA, 70 mA | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 8 | ||
Dimensions 4.9 x 3.9 x 1.5mm | ||
Length 4.9mm | ||
Width 3.9mm | ||
Height 1.5mm | ||
Maximum Operating Supply Voltage 5.5 V | ||
Minimum Operating Supply Voltage 4.5 V | ||
Maximum Operating Temperature +150 °C | ||
Automotive Standard AEC-Q100 | ||
Minimum Operating Temperature -40 °C | ||
The Microchip ATA6561 high-speed CAN FD ready CAN transceiver provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.
Communication speed up to 5Mbit/s
Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
Differential receiver with wide common mode range
Direct interfacing to microcontrollers with supply voltages from 3V to 5V
Remote wake-up capability via CAN bus
Functional behaviour predictable under all supply conditions
Transceiver disengages from the bus when not powered up
RXD recessive clamping detection
High electrostatic discharge (ESD) handling capability on the bus pins
Bus pins protected against transients in automotive environments
Transmit data (TXD) dominant time-out function
Undervoltage detection on VCC
CANH/CANL short-circuit and Overtemperature protected
8-Lead SOIC package
Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
Differential receiver with wide common mode range
Direct interfacing to microcontrollers with supply voltages from 3V to 5V
Remote wake-up capability via CAN bus
Functional behaviour predictable under all supply conditions
Transceiver disengages from the bus when not powered up
RXD recessive clamping detection
High electrostatic discharge (ESD) handling capability on the bus pins
Bus pins protected against transients in automotive environments
Transmit data (TXD) dominant time-out function
Undervoltage detection on VCC
CANH/CANL short-circuit and Overtemperature protected
8-Lead SOIC package