Microchip MCP2558FD-H/SN, CAN Transceiver 8Mbps CAN, 8-Pin SOIC

Se alla CAN Interface Ics
Mängdrabatt möjlig

Antal 30 enheter (levereras i ett rör)*

300,72 kr

(exkl. moms)

375,90 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Lagerinformation är för närvarande otillgänglig
Enheter
Per enhet
30 +10,024 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
177-1981P
Tillv. art.nr:
MCP2558FD-H/SN
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Maximum Data Rate

8Mbps

Number of Transceivers

1

IC Type

CAN Transceiver IC

Standard Supported

CAN

Maximum Supply Current

70 mA

Mounting Type

Surface Mount

Package Type

SOIC

Pin Count

8

Dimensions

4.9 x 3.9 x 1.5mm

Length

4.9mm

Width

3.9mm

Height

1.5mm

Maximum Operating Supply Voltage

5.5 V

Maximum Operating Temperature

+150 °C

Minimum Operating Supply Voltage

4.5 V

Minimum Operating Temperature

-40 °C

Automotive Standard

AEC-Q100

The MCP2557/8FD is a Microchip Technology Inc. high-speed CAN transceiver/CAN Flexible Data Rate Transceiver with Silent Mode. The device family members are MCP2557FD with No Connect pin 5 & MCP2558FD with VIO pin internal level shifting

Supports both Classic CAN or CAN Flexible Data Rate applications
Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Supports Silent Mode
Prevent disruption on the network due to local fault
Increased system reliability through redundancy
Test connection of the network
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.7V to 5.5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
Detection of Ground Fault:
Permanent Dominant Detection on TXD
Permanent Dominant Detection on Bus
Power-on Reset and Voltage Brown-Out Protection on VDD Pin
Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)