Raytech Cable Joint Kit Straight Polymeric Resin, Instructions, Cable Ties, Enclosure With Phase Separator, Sealing Tape

Mängdrabatt möjlig

Antal (1 enhet)*

303,63 kr

(exkl. moms)

379,54 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Beställningar under 500,00 kr (exkl. moms) kostar 119,00 kr.
I lager
  • 73 enhet(er) är redo att levereras
  • Plus 4 enhet(er) är redo att levereras från en annan plats
  • Dessutom levereras 4 enhet(er) från den 04 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 14303,63 kr
15 - 49288,62 kr
50 +273,17 kr

*vägledande pris

RS-artikelnummer:
713-3829
Tillv. art.nr:
Magic Joint 10
Tillverkare / varumärke:
Raytech
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Raytech

Product Type

Cable Joint Kit

Kit Contents

Polymeric Resin, Instructions, Cable Ties, Enclosure With Phase Separator, Sealing Tape

Kit Type

Straight

Standards/Approvals

No

COO (Country of Origin):
IT

Magic Joint Cable Jointing Kit


The Raytech Magic Joint is a cable joint suitable for extruded 0.6/1 kV cables. It is easy to install and is formed by two plastic half shells that, once closed on the cable after conductor connection, are then filled with the magic fluid. This cable jointing kit is ideal for installations in ducts or traps underground, submerged or directly exposed to the weather. Magic joint has no shelf life, is safe, non toxic and re-enterable even after long working periods. Fast in cross linking without any increase of temperature, the insulation has high dielectric characteristics

No shelf life

Completely non toxic

Cure time less than 10 minutes at room temperature

Joints are re-enterable even after log working periods

Degree of protection higher than IP68

Can be installed under water at any depth

Can be used safely in unventilated and confined areas

Note

Splices/ Connectors should be ordered separately to suit the cable type or application

Approvals

CEI EN 50393; CEI 20-33
Class 2 in accordance with CEI 64-8
Degree of protection higher than IP68 in accordance with IEC 529

Supplied with

1 x closure with phase separator, 1 x cable tie, sealing tape, bag of Magic Fluid, instructions.

Relaterade länkar