Vishay Bridge Rectifier, 6A, 400V, 4-Pin
- RS-artikelnummer:
- 700-5428P
- Tillv. art.nr:
- GBPC604-E4/51
- Tillverkare / varumärke:
- Vishay
Antal 5 enheter (levereras på en bricka)*
164,08 kr
(exkl. moms)
205,10 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 195 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 5 + | 32,816 kr |
*vägledande pris
- RS-artikelnummer:
- 700-5428P
- Tillv. art.nr:
- GBPC604-E4/51
- Tillverkare / varumärke:
- Vishay
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Vishay | |
| Peak Average Forward Current | 6A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 400V | |
| Mounting Type | Through Hole | |
| Package Type | GBPC6 | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 175A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -55 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 5µA | |
| Length | 16mm | |
| Dimensions | 16 x 16 x 5.08mm | |
| Width | 16mm | |
| Height | 5.08mm | |
| Välj alla | ||
|---|---|---|
Brand Vishay | ||
Peak Average Forward Current 6A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 400V | ||
Mounting Type Through Hole | ||
Package Type GBPC6 | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 175A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -55 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 5µA | ||
Length 16mm | ||
Dimensions 16 x 16 x 5.08mm | ||
Width 16mm | ||
Height 5.08mm | ||
Bridge Rectifiers for PCB Mounting, GBPC6 Series, Vishay Semiconductor
Suitable for Printed Circuit Board (PCB) mounting
Typical DC Reverse Current less than 0.5μA
Wire lead structure
Typical DC Reverse Current less than 0.5μA
Wire lead structure
Approvals
UL, E54214
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.