Vishay Bridge Rectifier, 6A, 800V, 4-Pin
- RS-artikelnummer:
- 629-5181
- Tillv. art.nr:
- GBPC608-E4/51
- Tillverkare / varumärke:
- Vishay
Mängdrabatt möjlig
Antal (1 enhet)*
36,40 kr
(exkl. moms)
45,50 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Sista RS lager
- 80 kvar, redo att levereras
- Plus 81 enhet(er) är redo att levereras från en annan plats
- Sista 6 400 enhet(er) levereras från den 21 januari 2026
Enheter | Per enhet |
|---|---|
| 1 - 9 | 36,40 kr |
| 10 - 49 | 33,15 kr |
| 50 - 99 | 31,02 kr |
| 100 - 249 | 29,12 kr |
| 250 + | 27,33 kr |
*vägledande pris
- RS-artikelnummer:
- 629-5181
- Tillv. art.nr:
- GBPC608-E4/51
- Tillverkare / varumärke:
- Vishay
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Vishay | |
| Bridge Type | Single Phase | |
| Peak Average Forward Current | 6A | |
| Peak Reverse Repetitive Voltage | 800V | |
| Mounting Type | Through Hole | |
| Package Type | GBPC6 | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 175A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -55 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 5µA | |
| Length | 16mm | |
| Dimensions | 16 x 16 x 5.08mm | |
| Width | 16mm | |
| Height | 5.08mm | |
| Välj alla | ||
|---|---|---|
Brand Vishay | ||
Bridge Type Single Phase | ||
Peak Average Forward Current 6A | ||
Peak Reverse Repetitive Voltage 800V | ||
Mounting Type Through Hole | ||
Package Type GBPC6 | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 175A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -55 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 5µA | ||
Length 16mm | ||
Dimensions 16 x 16 x 5.08mm | ||
Width 16mm | ||
Height 5.08mm | ||
Bridge Rectifiers for PCB Mounting, GBPC6 Series, Vishay Semiconductor
Suitable for Printed Circuit Board (PCB) mounting
Typical DC Reverse Current less than 0.5μA
Wire lead structure
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
Approvals
UL, E54214