Vishay Bridge Rectifier, 1000 V 60 A, 4-Pin Single
- RS-artikelnummer:
- 165-2684
- Tillv. art.nr:
- 2W10G-E4/51
- Tillverkare / varumärke:
- Vishay
Antal (1 rulle med 3000 enheter)*
10 299,00 kr
(exkl. moms)
12 873,00 kr
(inkl. moms)
Lägg till 3000 enheter för att få fri frakt
Tillfälligt slut
- Leverans från den 17 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 3,433 kr | 10 299,00 kr |
*vägledande pris
- RS-artikelnummer:
- 165-2684
- Tillv. art.nr:
- 2W10G-E4/51
- Tillverkare / varumärke:
- Vishay
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Vishay | |
| Product Type | Bridge Rectifier | |
| Peak Reverse Repetitive Voltage Vrrm | 1000V | |
| Mount Type | Through Hole | |
| Number of Phases | 1 | |
| Package Type | WOG | |
| Pin Count | 4 | |
| Configuration | Single | |
| Maximum Operating Temperature | 150°C | |
| Forward Current If | 2A | |
| Minimum Operating Temperature | -55°C | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 60A | |
| Peak Forward Voltage Vf | 1.1V | |
| Series | 2W10 | |
| Standards/Approvals | No | |
| Length | 9.86mm | |
| Height | 5.6mm | |
| Width | 8.84 mm | |
| Peak Reverse Current Ir | 5μA | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Vishay | ||
Product Type Bridge Rectifier | ||
Peak Reverse Repetitive Voltage Vrrm 1000V | ||
Mount Type Through Hole | ||
Number of Phases 1 | ||
Package Type WOG | ||
Pin Count 4 | ||
Configuration Single | ||
Maximum Operating Temperature 150°C | ||
Forward Current If 2A | ||
Minimum Operating Temperature -55°C | ||
Peak Non-Repetitive Forward Surge Current Ifsm 60A | ||
Peak Forward Voltage Vf 1.1V | ||
Series 2W10 | ||
Standards/Approvals No | ||
Length 9.86mm | ||
Height 5.6mm | ||
Width 8.84 mm | ||
Peak Reverse Current Ir 5μA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
Bridge Rectifiers with Wire Leads, 2WxxG Series, Vishay Semiconductor
Low DC reverse current
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
Approvals
UL E54214