Microchip MCP1642B-50I/MS, Boost Regulator, Boost 800mA Open Drain, 1 MHz 8-Pin, SOP

Se alla Boost Converters
Mängdrabatt möjlig

Antal (1 förpackning med 10 enheter)*

113,01 kr

(exkl. moms)

141,26 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Begränsat lager
  • Dessutom levereras 30 enhet(er) från den 23 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
10 - 1011,301 kr113,01 kr
20 - 4011,077 kr110,77 kr
50 - 709,475 kr94,75 kr
80 - 909,274 kr92,74 kr
100 +8,736 kr87,36 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
236-8861
Tillv. art.nr:
MCP1642B-50I/MS
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Regulator Function

Boost

Maximum Output Current

800mA

Number of Outputs

1

Line Regulation

0.5 %/V

Load Regulation

1.5 %

Package Type

SOP

Pin Count

8

Output Type

Open Drain

Maximum Switching Frequency

1 MHz

The Microchip synchronous boost regulator are compact, high-efficiency, fixed-frequency, synchronous step-up DC-DC converters. This family of devices provides an easy-to-use power supply solution for applications powered by either one-cell, two-cell, or three-cell alkaline, Ultimate Lithium, NiCd, NiMH, one-cell Li-Ion or Li-Polymer batteries. Low-voltage technology allows the regulator to start-up without high inrush current or output voltage overshoot from a low voltage input. High efficiency is accomplished by integrating the low-resistance N-Channel Boost switch and synchronous P-Channel switch.

Up to 96% typical efficiency
Low start-up voltage 0.65 V, typical 3.3 V VOUT @ 1 mA
Low operating input voltage 0.35 V, typical 3.3 V VOUT @ 1 mA
Internal synchronous rectifier
Internal compensation
Inrush current limiting and internal soft-start
Shutdown current 1 μA
Over temperature protection

All compensation and protection circuitry are integrated to minimize the number of external components. AnOpen drain power Good output is provided to indicate when the output voltage is within 10% of regulation and facilitates the interface with an MCU.

relaterade länkar