STMicroelectronics SPBTLE-RFTR Bluetooth Module 4.1
- RS-artikelnummer:
- 196-1998P
- Tillv. art.nr:
- SPBTLE-RFTR
- Tillverkare / varumärke:
- STMicroelectronics
Antal 1 enhet (levereras på en kontinuerlig remsa)*
104,92 kr
(exkl. moms)
131,15 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 194 enhet(er) från den 19 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 104,92 kr |
*vägledande pris
- RS-artikelnummer:
- 196-1998P
- Tillv. art.nr:
- SPBTLE-RFTR
- Tillverkare / varumärke:
- STMicroelectronics
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | STMicroelectronics | |
| Bluetooth Version | 4.1 | |
| Maximum Output Power | 4dBm | |
| Receiver Sensitivity | -88dBm | |
| Supported Bus Interfaces | SPI | |
| Supported I/O Interfaces | IRQ, RESET, SPI | |
| Dimensions | 13.5 x 11.5 x 2mm | |
| Height | 2mm | |
| Length | 13.5mm | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| Width | 11.5mm | |
| Välj alla | ||
|---|---|---|
Brand STMicroelectronics | ||
Bluetooth Version 4.1 | ||
Maximum Output Power 4dBm | ||
Receiver Sensitivity -88dBm | ||
Supported Bus Interfaces SPI | ||
Supported I/O Interfaces IRQ, RESET, SPI | ||
Dimensions 13.5 x 11.5 x 2mm | ||
Height 2mm | ||
Length 13.5mm | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
Width 11.5mm | ||
- COO (Country of Origin):
- KR
The SPBTLE-RF is an easy to use Bluetooth® low energy master/slave network processor module, compliant with Bluetooth v4.1. The SPBTLE-RF module supports multiple roles simultaneously, and can act at the same time as Bluetooth low energy sensor and hub device. The entire Bluetooth low energy stack and protocols are embedded into SPBTLE-RF module. The external host application processor, where the application resides, is connected to the SPBTLE-RF module through a standard SPI interface. The SPBTLE-RF module provides a complete RF platform in a tiny form factor. Radio, antenna, high frequency and LPO oscillators are integrated to offer a certified solution to optimize the time to market of the final applications. The SPBTLE-RF can be powered directly with a standard 3 V coin cell battery, a pair of AAA batteries or any power source from 1.7 to 3.6 V.