RS PRO Blower Gun Conveyor Hose, 6bar
- RS-artikelnummer 806-820
- Tillverkare / varumärke RS PRO
Blow/Vacuum Gun
Air powered clean up guns that can be converted into a vacuum or blow gun by unscrewing the rear of the gun, reversing the venturi unit and screwing the gun back together
The venturi/vortex action multiplies input and prevents risk of stalling
Constructed from hard wearing maintenance nylon 6 that is also oil resistant and chemically inert
1/4in BSP Inlet
Max working pressure 6 bar
Accessories available separately, not supplied with dustbag
Accessories:
806-791- Flared Nozzle
806-808 - 450mm Extension Tube
806-814 - Crevice Tool
806-785 - Dust Bag Kit
806-820 - 2m Conveyor Hose
Caution
Non-restricted type blow guns must only be used on air lines which have a pressure regulator set at a maximum of 30 psi.
Warning
-
To avoid risk of injury, these guns must only be used with either a suitable dust bag or conveying hose.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.
| Attribute | Value |
|---|---|
| Type | Conveyor Hose |
| Working Pressure | 6bar |
| Air Inlet BSP | 1/4in |
