FAG 16006-A 1 Row Ball Bearing - 30 mm ID, 55 mm OD

Mängdrabatt möjlig

Antal (1 enhet)*

184,58 kr

(exkl. moms)

230,72 kr

(inkl. moms)

I lager

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

*vägledande pris

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

	Välj alla
	Brand FAG
	Inside Diameter 30 mm
	Product Type Ball Bearing
	Outside Diameter 55 mm
	Race Width 9mm
	Cage Material Steel
	Ball Material Steel
	End Type Open
	Number of Rows 1
	Static Load Rating 7.3kN
	Internal Clearance CN
	Dynamic Load Rating 11.9kN
	Bore Type Parallel
	Standards/Approvals No
	Limiting Speed 18500rpm
	Bearing Type Single Row Deep Groove Ball
	Race Type Plain

High and very high speeds are required

The bearing arrangement must be operated with very low friction

Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)

High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)

The bearing position is to be designed particularly economically

Double row bearings can be considered for bearing arrangements where:

The load carrying capacity of single row deep groove ball bearings is no longer sufficient

Axial loads in both directions and/or tilting moments must be supported in addition to radial loads

A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small

relaterade länkar