SKF 6202/16-2RSH Deep Groove- Both Sides Sealed 16mm I.D, 35mm O.D

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.

Features:

• Excellent performance in hot conditions, dry environments and low rotational speed applications
• Temperature range -30°C to 150°C
• Suitable for high and very high speeds
• Steel/Ceramic ball material
• Plain race type
• Low friction
• Available in many designs, variants and sizes

Why choose Deep Groove Ball Bearings?

• For their versatility - channelling radial and axial loads they are widely used in many industries
• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt
• Low maintenance - no additional lubrication after installation

Applications:

• Agricultural industry
• Food processing
• Machine Tools
• Material handling
• Medical/Pharmaceutical
• Printing
• Wind energy

What is the inner ring diameter?
A range between 6 mm to 40 mm

What is internal/external design?

• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides
• Z, 2Z - Shield on one or both sides
• 2RSL - RSL low-friction contact seal on both sides of the bearing
• 2RZ - RZ low-friction non-contact seal on both sides of the bearing
• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring
• NR - Snap ring groove in the outer ring, with an appropriate snap ring
• E - Reinforced ball set

Cage Design

• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred
• Stainless steel

Lubrication

• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease
• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C
• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C
• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade)

Accuracy/Clearance

• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal
• C4 - Radial internal clearance greater than C3
• C5 - Radial internal clearance greater than C4

This plain deep groove ball bearing from SKF provides reliable performance and a long working life even in high operating temperatures. It can handle both radial and axial loads, making it suitable for a wide range of applications. The use of a long-lasting lubricant inside the sealed bearing removes the need for maintenance. Low friction torque keeps the temperature of the bearing low, which improves efficiency and reduces the energy costs generated by your equipment.

• Plain deep groove ball bearing
• Sealed end-type with stainless steel cage design
• Parallel bore type
• Plain race width of 11 mm
• Inside diameter of 16 mm
• Outside diameter of 35 mm
• Operating temperature range of -40°C to +100°C
• Static load rating of 3.75 kN
• Dynamic load rating of 8.06 kN

• Agriculture
• Food processing
• Medical/pharmaceutical
• Printing
• Wind energy

What type of seal is used in SKF plain deep groove ball bearings?

In a plain deep groove ball bearing, the race dimensions are close to the dimensions of the balls that run in it. This allows them to support heavy weights, as well as both radial and axial loads.

Deep Groove Ball Bearings