Matrix EBM018, E-block Colour Sensor Module

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

EBM018 Colour Sensor Module

The EBM018 module measures ambient and reflected RGB light colour using an on-board TC53200D colour sensor and bright white light LED illuminators.

Features & Benefits of the EBM018 Colour Sensor Module
•Plastic housing to prevent contamination of the colour sensor
•Flowcode free 30-day free trial
•0.1 inch pitch connector enables the module to be connected to other boards aside the EB090 Sensor Mother Board

Note: The module requires a 14 V power supply

Note

This sensor is also included within the EBM1000 E-block Sensors Bundle (889-2999). The kit includes the entire range of e-blocks sensor modules with the EB090 Sensor Mother Board.

E-blocks EBMxxx Sensor Modules

A range of Matrix E-blocks sensor modules which are intended for use with the EB090 E-block Sensor Mother Board (889-2905). Any two individual sensor modules can be plugged into an EB090 E-block board allowing upstream access to various analogue and digital sensors.

Matrix Techonlogy E-Blocks

E-blocks from Matrix Technology are small circuit boards with a block of electronics that are typically found in an electronic or embedded system. They be quickly snapped together to form a fully functioning systems and this ease of use makes them ideal for rapid prototyping.

Currently there are more than 50 E-Block boards available. From simple LED boards to sensors, Bluetooth, Motor Control, RFID, LCD Display, WiFi, GPS and many more. Whether you are PIC or Arduino programming or working with other hardware platforms there is sure to be something to suit your needs.

E-blocks are supported with software (including PIC, dsPIC, ARM and AVR Arduino IDE, Flowcode) and courseware.

Specifikationer
Attribute Value
Analogue Function Colour Sensor
Kit Classification Module
Kit Name E-block
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
212,90 kr
(exkl. moms)
266,12 kr
(inkl. moms)
Enheter
Per unit
1 +
212,90 kr
Related Products
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance ...
Description:
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance sensors with high resolution, excellent noise rejection, automatic calibration and factory set beam patterns. These small, lightweight sensor modules have three outputs: analogue voltage, digital PWM, and RS232 or TTL serial data. ...
chiliboard Sensors Sandwich by Grinn consists of sensors ...
Description:
chiliboard Sensors Sandwich by Grinn consists of sensors and is suitable for use with chiliboard and liteboard. • Integrated environmental sensor form Bosch Sensortec BME280 • Light sensor from Lite-On LTR-329ALS-01 • Temperature sensor from Microchip MCP9808-E/MS • 3-Axes accelerometer ...
A hybrid configuration of Nutube + class D ...
Description:
A hybrid configuration of Nutube + class D headphone amp. You can switch between Nutube and OP amp configurations at the pre stage. It employs a damping factor circuit which attains the same results as a vacuum tube + OUTPUT ...
This board demonstrates the performance of Microchip’s MCP6N11 ...
Description:
This board demonstrates the performance of Microchip’s MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchip’s MCP6V26 and MCP6V27 auto-zeroed op amps. The input signal comes from an RTD temperature sensor in a Wheatstone bridge. Real ...