Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Maxim Integrated
	Filter Type	Band Pass Filter, Low Pass Filter
	Architecture	Continuous Time
	Cut-off Frequency	150kHz
	Power Supply Type	Dual, Single
	Typical Single Supply Voltage	5 V
	Typical Dual Supply Voltage	±5V
	Number of Circuits	1
	Mounting Type	Through Hole
	Package Type	PDIP
	Pin Count	24
	Dimensions	32.13 x 7.87 x 4.45mm
	Height	4.45mm
	Operating Temperature Range	-40 → +85 °C
	Length	32.13mm
	Maximum Operating Temperature	+85 °C
	Width	7.87mm
	Minimum Operating Temperature	-40 °C

	Välj alla
	Brand Maxim Integrated
	Filter Type Band Pass Filter, Low Pass Filter
	Architecture Continuous Time
	Cut-off Frequency 150kHz
	Power Supply Type Dual, Single
	Typical Single Supply Voltage 5 V
	Typical Dual Supply Voltage ±5V
	Number of Circuits 1
	Mounting Type Through Hole
	Package Type PDIP
	Pin Count 24
	Dimensions 32.13 x 7.87 x 4.45mm
	Height 4.45mm
	Operating Temperature Range -40 → +85 °C
	Length 32.13mm
	Maximum Operating Temperature +85 °C
	Width 7.87mm
	Minimum Operating Temperature -40 °C

Datasheet - MAX274AENG+

Continuous-TIme Filter - No Clock, No Clock Noise
Implement Butterworth, Chebyshev, Bessel and Other Filter Responses
Lowpass, Bandpass Outputs
Operate from a Single +5V Supply or Dual ±5V Supplies
Design Software Available
MAX274 Evaluation Kit Available
8th-Order-Four 2nd-Order Sections (MAX274)
4th-Order-Two 2nd-Order Sections (MAX275)
Center-Frequency Range:
150kHz for MAX274
300kHz for MAX275
Low Noise:
-86dB THD Typical for MAX274
-89dB THD Typical for MAX275
Center-Frequency Accurate Over Temp:
within ±1% for MAX274
within ±0.9% for MAX275
Applications
Audio/Sonar/Avionics Frequency Filtering
DAC Output-Smoothing Filters
Low-Distortion Anti-Aliasing Filters
Modems
Vibration Analysis

Maxim Integrated Band Pass Filter, Low Pass Filter Active Filter