MPU-6000 InvenSense, 6-Axis Motion Sensor Module, I2C, SPI, 24-Pin QFN

  • RS-artikelnummer 883-7945
  • Tillv. art.nr MPU-6000
  • Tillverkare / varumärke InvenSense
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): TW
Produktdetaljer

Motion Tracking Device MPU-6000,6 Axis, InvenSense

InvenSense MPU-6000™ 6-axis I2C motion processor combines a 3-axis gyroscope and a 3-axis accelerometer alongside an onboard Digital Motion Processor (DMP) all on one device. The motion processing unit features programmable gyroscope and accelerometer designed for accuracy in fast and slow motion tracking. The MEMS motion tracking device MPU-6000 incorporates MotionFusion algorithms which will also access external sensors via the auxiliary master I2C bus, The MPU-6000 is widely used in smartphones, tablets and wearable sensor technology.

Supports SPI at up to 20MHz in addition to I2C
User programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps)
User programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g
Dimensions: 4 mm x 4 mm x 0.9 mm (QFN package)

Inertial Measurement Units (IMU), Invensense

Specifikationer
Attribute Value
Sensor Type Motion Sensor Module
Number of Axis 6
Technology Digital
Mounting Type Surface Mount
Interface Type I2C, SPI
Maximum Frequency Response 30 (Z-Axis) kHz, 33 (Y-Axis) kHz, 36 (X-Axis) kHz
Minimum Frequency Response 24 (Z-Axis) kHz, 27 (Y-Axis) kHz, 30 (X-Axis) kHz
Maximum Operating Supply Voltage 3.46 V
Minimum Operating Supply Voltage 2.375 V
Package Type QFN
Sensitivity 16.4°/s/LSB
Pin Count 24
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
29 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
110,33 kr
(exkl. moms)
137,91 kr
(inkl. moms)
Enheter
Per unit
1 - 4
110,33 kr
5 - 9
96,78 kr
10 - 49
87,06 kr
50 +
71,55 kr
Förpackningsalternativ:
Related Products
iNEMO inertial modules from ST Microelectronic integrate complementary ...
Description:
iNEMO inertial modules from ST Microelectronic integrate complementary types of sensors offering a compact, robust, and easy-to-assemble solution compared to many other discrete MEMS products. The iNEMO System-in-packages (SiP) combine accelerometer, gyroscope and magnetometer in either a monolithic 6-axis or ...
The BMA280 is a 14-Bit, digital, tri-axial acceleration ...
Description:
The BMA280 is a 14-Bit, digital, tri-axial acceleration sensor with intelligent on-chip motion-triggered interrupt controller. Accelerometer programmable function ranges ±2g/±4g/±8g/±16gOn-Chip FIFO (First In First Out)Motion-triggered interrupt-signal generationUltra-Low PowerPower modes: Normal, Low-Power1, ...
The BMA250E is a 10-Bit, Digital, Triaxial Acceleration ...
Description:
The BMA250E is a 10-Bit, Digital, Triaxial Acceleration Sensor with intelligent on-chip motion-triggered interrupt controller. Accelerometer programmable function ranges ±2g/±4g/±8g/±16gOn-Chip FIFO (First In First Out)Motion-triggered Interrupt-signal generationUltra-Low PowerPower modes: Normal, Low-Power1, ...
ST Microelectronics 3-axis gyroscopes have a single sensing ...
Description:
ST Microelectronics 3-axis gyroscopes have a single sensing structure to measure motion along all three orthogonal axes rather than three separate structures. This reduces interference between the axes to increase accuracy and reliability.Measuring a wide range of angular acceleration, from ...