Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filter

Visar 21 - 40 av 582 produkter
Resultat per sida
Beskrivning Pris Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS-artikelnummer 119-198
VarumärkeRS PRO
4,258 kr
Each (In a Pack of 25)
Enheter
Butt - 10 mm² 10mm² 23mm 4.5mm - Uninsulated - - - - - -
RS-artikelnummer 809-2372
VarumärkeRS PRO
0,452 kr
Each (In a Pack of 100)
Enheter
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 8mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS-artikelnummer 178-7254
VarumärkeRS PRO
1,678 kr
Each (In a Bag of 100)
Enheter
- - 8 AWG, 10 mm² 10mm² 10mm 8mm - Uninsulated 8AWG - - - - -
RS-artikelnummer 178-7185
VarumärkeRS PRO
8,538 kr
Each (In a Bag of 50)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 36mm 2.3mm 16AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 510-4860
VarumärkeRS PRO
49,53 kr
1 Bag of 50
Påse(ar)
Tap 1.5mm² 16 → 14 AWG 2.5mm² 49mm 20mm 16AWG Insulated 14AWG - Blue, Red - Nylon -
RS-artikelnummer 178-7173
VarumärkeRS PRO
0,376 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 16 → 14 AWG 2.5mm² - - 16AWG Uninsulated 14AWG - - 17.8 x 4mm - 17.8mm
RS-artikelnummer 510-4876
VarumärkeRS PRO
43,12 kr
1 Bag of 50
Påse(ar)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 31mm 17.5mm 18AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 510-4826
VarumärkeRS PRO
28,98 kr
1 Bag of 50
Påse(ar)
Tap 4mm² 12 → 10 AWG 6mm² 34.5mm 20.5mm 12AWG Insulated 10AWG - Yellow - PP -
RS-artikelnummer 534-519
VarumärkeRS PRO
2,084 kr
Each (In a Pack of 100)
Enheter
Butt 4mm² 12 → 10 AWG 6mm² 24.5mm 5.8mm 12AWG Insulated 10AWG - Yellow - PVC -
RS-artikelnummer 178-7228
VarumärkeRS PRO
0,387 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS-artikelnummer 119-211
VarumärkeRS PRO
4,653 kr
Each (In a Pack of 10)
Enheter
Butt - 25 mm² 25mm² 31mm 6.7mm - Uninsulated - - - - - -
RS-artikelnummer 178-7186
VarumärkeRS PRO
7,355 kr
Each (In a Bag of 50)
Enheter
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 41mm 3.4mm 12AWG Insulated 10AWG - Yellow - - -
RS-artikelnummer 178-7216
VarumärkeRS PRO
0,559 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS-artikelnummer 510-5330
VarumärkeRS PRO
78,38 kr
1 Bag of 50
Påse(ar)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - Blue - PP -
RS-artikelnummer 613-9772
VarumärkeRS PRO
1,221 kr
Each (In a Pack of 100)
Enheter
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 16.5mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS-artikelnummer 178-7222
VarumärkeRS PRO
0,828 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 24.6mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS-artikelnummer 178-7209
VarumärkeRS PRO
1,699 kr
Each (In a Bag of 100)
Enheter
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS-artikelnummer 178-7188
VarumärkeRS PRO
8,947 kr
Each (In a Bag of 50)
Enheter
- 0.5-1.5mm² 0.5-1.5 → 1.5-2.5 mm², 22-16 → 16-14 AWG 1.5-2.5mm² 36mm 1.7 (d2) mm, 2.3 (d1) mm 22-16AWG Insulated 16-14AWG - - - - -
RS-artikelnummer 841-7683
VarumärkeRS PRO
5,003 kr
Each (In a Pack of 50)
Enheter
Butt - 50 mm² - 40mm 12.4mm - Uninsulated - - - - - -
RS-artikelnummer 841-7677
VarumärkeRS PRO
2,17 kr
Each (In a Pack of 100)
Enheter
Butt - 16 mm² - 30mm 7.5mm - Uninsulated - - - - - -
Related Products
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
The Wago Techno 221 series female white colour ...
Description:
The Wago Techno 221 series female white colour push-in type connector is a modular, screw-type electrical connector used to connect two or more wires. It has a mounting carrier for 2-conductor terminal blocks. • Cable size is between 0.5mm² and ...