Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filter

Visar 1 - 20 av 34 produkter
Resultat per sida
Beskrivning Pris Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS-artikelnummer 838-8383
Tillv. art.nrCE-1
VarumärkeJST
1,086 kr
Each (In a Pack of 100)
Enheter
- - 0.5 → 1.75 mm², 22 → 16 AWG - 20.8mm - - Insulated - - - - Nylon -
RS-artikelnummer 165-7981
Tillv. art.nrCE-1
VarumärkeJST
833,92 kr
1 Box of 1000
Låda(or)
- - 0.5 → 1.75 mm², 22 → 16 AWG - 20.8mm - - Insulated - - - - Nylon -
RS-artikelnummer 166-7508
Tillv. art.nrFNC-1.25
VarumärkeJST
2,791 kr
Each (In a Box of 500)
Enheter
Butt - 0.25 → 1.65, 22 → 16 AWG - 22.7mm - - Insulated - - Red - Nylon -
RS-artikelnummer 165-7946
Tillv. art.nrP1.25
VarumärkeJST
579,66 kr
1 Box of 1000
Låda(or)
Parallel - 0.25 → 1.65 mm², 22 → 16 AWG - 8mm 3.3mm - Uninsulated - - - - - -
RS-artikelnummer 838-8235
Tillv. art.nrFNC-1.25
VarumärkeJST
4,136 kr
Each (In a Pack of 50)
Enheter
Butt - 0.25 → 1.65, 22 → 16 AWG - 22.7mm - - Insulated - - Red - Nylon -
RS-artikelnummer 838-8389
Tillv. art.nrP1.25
VarumärkeJST
0,847 kr
Each (In a Pack of 100)
Enheter
Parallel - 0.25 → 1.65 mm², 22 → 16 AWG - 8mm 3.3mm - Uninsulated - - - - - -
RS-artikelnummer 752-1927
Tillv. art.nrCL-2218S
VarumärkeJST
2,998 kr
Each (In a Pack of 5)
Enheter
Tap - 22 → 18 AWG - 20mm 13.8mm - Insulated - - Red - Nylon -
RS-artikelnummer 172-5018
Tillv. art.nrCL-2218S
VarumärkeJST
2,248 kr
Each (In a Bag of 500)
Enheter
Tap - 22 → 18 AWG - 20mm 13.8mm - Insulated - - Red - Nylon -
RS-artikelnummer 165-7979
Tillv. art.nr2-SDW
VarumärkeJST
967,39 kr
1 Box of 1000
Låda(or)
- - 1.5 → 3 mm², 16 → 14 AWG - 17.1mm - - Insulated - - - - Nylon -
RS-artikelnummer 688-1149
Tillv. art.nrFVP-2
VarumärkeJST
1,325 kr
Each (In a Pack of 100)
Enheter
Parallel - 16 → 14 AWG - 16mm - - Insulated - - - - Vinyl -
RS-artikelnummer 161-7863
Tillv. art.nrC-8
VarumärkeJST
4,006 kr
Each (In a Box of 500)
Enheter
Butt - 8 AWG, 6.64 → 10.52 mm² - 21mm 7mm - Uninsulated - - - - - -
RS-artikelnummer 166-7427
Tillv. art.nrFVC-1.25(LF)
VarumärkeJST
1 046,54 kr
1 Box of 1000
Låda(or)
Butt - 22 → 16 AWG - 22.7mm 4mm - Insulated - - Red - Nylon, Vinyl -
RS-artikelnummer 166-7559
Tillv. art.nrFVC-2(PA)
VarumärkeJST
1,39 kr
Each (In a Box of 500)
Enheter
Butt - 16 → 14 AWG - 22.7mm 4.5mm - Insulated - - Blue - Nylon, Vinyl -
RS-artikelnummer 166-7274
Tillv. art.nrC-5.5
VarumärkeJST
1 869,62 kr
1 Box of 1000
Låda(or)
Butt - 12 → 10 AWG, 2.63 → 6.64 mm² - 15mm 5.4mm - Uninsulated - - - - - -
RS-artikelnummer 838-8395
Tillv. art.nrCE-5
VarumärkeJST
2,24 kr
Each (In a Pack of 50)
Enheter
- - 12 → 10 AWG, 2.5 → 6 mm² - 27mm - - Insulated - - - - Nylon -
RS-artikelnummer 688-1032
Tillv. art.nrFVC-5.5(LF)
VarumärkeJST
2,007 kr
Each (In a Pack of 100)
Enheter
Butt - 12 → 10 AWG - 26.7mm 6.8mm - Insulated - - Yellow - Nylon, Vinyl -
RS-artikelnummer 165-7939
Tillv. art.nrCE-2
VarumärkeJST
833,92 kr
1 Box of 1000
Låda(or)
- - 1 → 3 mm², 16 → 14 AWG - 21mm - - Insulated - - - - Nylon -
RS-artikelnummer 161-7864
Tillv. art.nrC-38
VarumärkeJST
23,507 kr
Each (In a Box of 100)
Enheter
Butt - 2 AWG, 26.66 → 42.42 mm² - 32mm 13.2mm - Uninsulated - - - - - -
RS-artikelnummer 688-1145
Tillv. art.nrFVP-1.25(PA)(LF)
VarumärkeJST
2,155 kr
Each (In a Pack of 100)
Enheter
Parallel - 22 → 16 AWG - 16mm - - Insulated - - Red - Nylon, Vinyl -
RS-artikelnummer 166-7544
Tillv. art.nrFVC-5.5(LF)
VarumärkeJST
1,666 kr
Each (In a Box of 250)
Enheter
Butt - 12 → 10 AWG - 26.7mm 6.8mm - Insulated - - Yellow - Nylon, Vinyl -