RS PRO Bronze 30 Teeth Worm Wheel Gear, 30mm PitchDiam. , 20mm Hub Diam. , 16.5mm Face Width

  • RS-artikelnummer 521-6957
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Metric Worm Gears & Pinion Gears - Steel & Bronze

Worm gears and pinion gears designed to produce large speed reduction ratios, especially in low loading applications. Available in modules 0.8 and 1.0. Both the pinion gear and worm gear module number / number of starts must match to ensure correct assembly.

Features and Benefits

Worm gear manufactured from steel (pinion gears from phosphor bronze each sold separately) Worm gears are secured onto a shaft using a M4 grub screw (supplied)
H7 pilot bore tolerance
Right-hand gear direction

Note

Worm gears and pinions should be ordered separately.

Specifikationer
Attribute Value
Module 1
Material Bronze
Number of Teeth 30
Pitch Diameter 30mm
Hub Diameter 20mm
Face Width 16.5mm
16 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
262,46 kr
(exkl. moms)
328,08 kr
(inkl. moms)
Enheter
Per unit
1 - 4
262,46 kr
5 - 9
251,96 kr
10 +
241,46 kr
Related Products
A range of RS Pro flexible metric racks ...
Description:
A range of RS Pro flexible metric racks made from Duracon, aluminium fixing rails and clamping plates and screws (Sold Separately). These racks can be mounted directly onto the application surface or by using the aluminium fixing rails. • Racks ...
Metric gear racks with a pressure angle of ...
Description:
Metric gear racks with a pressure angle of 20°. Gear racks can be supplied in lengths of 300, 500 and 1000mm and with various pitch from 0.5 module to 2 module. Available in steel or nylon to a dimensional tolerance ...
Injection moulded acetal co-polymer mitre gears giving a ...
Description:
Injection moulded acetal co-polymer mitre gears giving a gear ratio of 1:1. Tensile strength 94N/mm2Hardness (Rockwell R) 110-120Pitch angle 45°, pressure angle 49° 48'Number of teeth 20.
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).