RS PRO 687 Series Latching Air Switch, 250mm Fly Lead, Panel Mounted

  • RS-artikelnummer 319-758
  • Tillverkare / varumärke RS PRO
Lagstiftning och ursprungsland
COO (Country of Origin): GB

Air Operated Switches, 2-Pole Element, Through Panel

Double-pole momentary or latching air-operated switch elements with two SPDT microswitches acting simultaneously
The contacts are rated at 15A 250 Vac./30Vdc and connection is via 250 ( 1/4 in) terminals
Through panel fixture is by means of a 9/16 UNF nut (supplied) or may be surface mounted using the additional 3.2 mm fixing holes, suitable for M3 screws or No. 6 self tapping screws
Operating temperature range -10°C to +60°C (subject to tube length limitations - see additional data tables)




Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Attribute Value
Manufacturer Series 687
Type Latching
Mounting Type Panel
Operation NO/NC
For Use With Battery Charging Rooms, Garages or Wherever Explosive Gases, Laboratories, Vapours or Powders May Exist, 3 mm I/D Tubing
33 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
228,54 kr
(exkl. moms)
285,68 kr
(inkl. moms)
Per unit
1 - 4
228,54 kr
5 - 9
221,38 kr
10 +
214,33 kr
Relaterte Produkter
These versatile general purpose switches can be used ...
These versatile general purpose switches can be used in a wide range of hydraulic and pneumatic applications. Their proven piston/diaphragm design offers outstanding accuracy over a very wide pressure range with an outstanding 6000 psi proof pressure. Gems offers a ...
The 5000 series pressure switches have been designed ...
The 5000 series pressure switches have been designed to be used in various applications ranging from standard to ultra-heavy duty. The switches sense a change in the pressure and when a designated set point is reached they will either open ...
From the trusted RS PRO brand, a series ...
From the trusted RS PRO brand, a series of adjustable pressure switches designed for hydraulic and pneumatic applications. Designed to detect a rise or fall in fluid pressure, the durable switches provide an electrical signal once the setpoint pressure is ...
Fitted with two V3 SPDT microswitchesPassivated steel bracketSwitches ...
Fitted with two V3 SPDT microswitchesPassivated steel bracketSwitches riveted to bracketSupplied with red, green & black buttonsContact Rating -250Vac 16 (4) ASingle hole mounting - 12 mm.