SUBCON-PLUS-PROFIB/AX Series, Phoenix Contact Male Spring Terminal D-sub Connector, 9 Way, Cable Mount

  • RS-artikelnummer 410-5351
  • Tillv. art.nr 2744377
  • Tillverkare / varumärke Phoenix Contact
Datablad
Lagstiftning och ursprungsland
Uppfyller ej
COO (Country of Origin): DE
Produktdetaljer

SUBCON-PLUS Profibus

Can be used on all Profibus systems up to 12Mbit/s
When the optional terminating resistor is switched in, the output circuit is disconnected to aid fault finding by segmenting the network
Additional connection for a programming or service device
Spring terminal or screw terminal connector technology (...SC...)
Integral strain relief
Cable entry optionally left or right (exc. PROFIB/PG and PROFIB/PG/SC2)
Programming connection optional (...PG...)
Cable entry axial (...AX...)

SUBCON-PLUS D-Sub Bus Connector

From Phoenix Contact, this SUBCON-PLUS series Bus connector can be used on all Profibus systems up to 12 Mbit/s. The connector has a 9-posistion D-Sub with two cable entries, for additional connection of a programming or service device.
The D-sub Bus Connector also features a switch operated termination resistor, which when activated disconnects the output circuit to aid fault finding by segmenting the network.

Features and Benefits

• Spring terminal or screw terminal connector technology (...SC...)
• Integral strain relief
• Cable entry optionally left or right (exc. PROFIB/PG and PROFIB/PG/SC2)
• Programming connection optional (...PG...)
• Cable entry axial (...AX...)
• Mating Cycles: 200 min.
• Metal plated housing
• Protected to IP40

Application Information

PROFIBUS Fieldbus connecters are typically used for linking process controls and plant automation modules.

Note

2744377 SUBCON-PLUS-PROFIB/AX

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specifikationer
Attribute Value
Gender Male
Number of Contacts 9
Body Orientation Straight
Housing Material Metal Plated Plastic
Current Rating 100mA
Voltage Rating 50 V
Dimensions 31.5 x 58.2 x 17mm
Mounting Type Cable Mount
Series SUBCON-PLUS-PROFIB/AX
Depth 17mm
Width 58.2mm
Maximum Operating Temperature +70°C
Length 31.5mm
Minimum Operating Temperature -20°C
44 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
460,54 kr
(exkl. moms)
575,68 kr
(inkl. moms)
Enheter
Per unit
1 - 24
460,54 kr
25 - 74
358,69 kr
75 - 199
340,81 kr
200 - 399
323,75 kr
400 +
307,72 kr
Related Products
These 8656 Series D-Subminiature Connectors have removable crimp ...
Description:
These 8656 Series D-Subminiature Connectors have removable crimp contacts (supplied separately) and will accept the standard range of FCI accessories such as hoods and locking devices. Range of Sub-D connectors for crimp connection.Indents on male connectors.Products are UL certified.Bulk boxes ...
"D" connectors with crimp snap-in contacts. Closed entry ...
Description:
"D" connectors with crimp snap-in contacts. Closed entry socket insulators correct misaligned pins during engagement.,Socket shells accept socket contacts and plug shells accept pin contacts. Suitable crimp tool stock no. 458-904 and extraction tool stock no. 469-500.
Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, ...
Description:
Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also ...
Tinned metal housing with laminated ribbing for the ...
Description:
Tinned metal housing with laminated ribbing for the shielding. Installation in KSG 183, 184 und 185 possibleIndividual contact assignment, thus also partial assignmentCompatible with all common makesCan also be applied to external tools.