Hydralectric Solenoid Valve Adapter 72002

  • RS-artikelnummer 342-039
  • Tillv. art.nr 72002
  • Tillverkare / varumärke Hydralectric
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Compression Adaptor

Suitable for use with 1/2 in. BSP Solenoid port to 15mm (compression) pipe fitting
Compression adaptors (sold in multiples of 2)

//media.rs-online.com/t_line/L342017-02.gif
//media.rs-online.com/t_line/L439060-04.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifikationer
Attribute Value
Accessory Type Adapter
For Use With 1/2 in BSP Solenoid Port → 15 mm Ccompression Pipe Fitting
70 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 2)
58,65 kr
(exkl. moms)
73,31 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
2 - 8
58,65 kr
117,30 kr
10 - 18
56,25 kr
112,50 kr
20 +
54,975 kr
109,95 kr
Related Products
The Omron E8FC is a transmitter adapter used ...
Description:
The Omron E8FC is a transmitter adapter used with a flowmeter sensor. It is used to measure differential pressure to determine fluid flow. It is made from austenitic stainless steel (SUS304). • It uses 1/2IN R taper thread type.
• Suitable for low pressure applications• Allows compressed ...
Description:
• Suitable for low pressure applications• Allows compressed air from one side to flow and blocks the inverse flow to protect and maintain the vacuum line• Easily applied to low pressure piping• Applicable fluid type, air (no other type of ...
A high-quality polymer push in fitting suitable for ...
Description:
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable ...
In-line flow adaptors incorporating paddle wheel transducer which ...
Description:
In-line flow adaptors incorporating paddle wheel transducer which is set in rotation when liquid flows through the pipe. G-port connection (internal thread)PVDF paddle wheel and ceramic axis and bearingMeasuring range from 0.3 m/s (AF> 1//2 inch pipe, 0.3 fps flow ...