440G-T Solenoid Interlock Switch Power to Lock 24 V ac/dc

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer
//media.rs-online.com/t_line/L351399-01.gif
//media.rs-online.com/t_line/L357917-01.gif

Allen Bradley Guardmaster Guard Locking Switch

The Allen Bradley Guardmaster TLS-GD2 series positive mode, tongue operated guard locking interlock switch locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. This switch has three safety (NC) contacts and two auxiliary (NO) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. It is provided with a blanking plug to seal the unused slot. It has a power-to-lock function, also has five sets of contacts of various forms and is suitable for use with PLCs.

Note:
Actuator is not supplied and must be ordered separately
.
Incorporates a power-to-unlock function

Warning:
With the “power to lock” function, provisions are required to ensure that a dangerous situation cannot result from open circuit faults or power cuts.

Features and Benefits

The supply voltage is 24VAC/DC

Power-to-lock
High locking force of 2000N (450lb)
Five contacts are 2NC and 1NO for door position monitoring, 1NC and 1NO
for lock monitoring
Rotatable head and four possible actuator entry positions
Lid mounted status indication
Three manual release points with security screws for use in the event of an emergency
Suitable for high-pressure, high temperature and wash down
Key release lids available for unlocking the locking mechanism in emergencies
Rated insulation voltage is 500V
Thermal current is 10A
Conduit entry is M20

Certifications

EN954-1
ISO13849-1
IEC/EN60204-1
NFPA79
EN1088
ISO14119
IEC/ EN60947-5-1
ANSI B11.19, AS4024
CE certified
UL approved
cULus approved
TUV certified
CCC certified
IP69K rated

Specifikationer
Attribute Value
Range TLS-2-GD2
Series 440G-T
Power to Lock / Unlock Power to Lock
Conduit Entry M20
Length 126mm
Width 86mm
Depth 33mm
Supply Voltage 24 V ac/dc
Housing Material Plastic
Dimensions 39 x 86 x 126 mm
IP Rating IP66, IP67, IP69K
Safety Contacts 2NC
Auxiliary Contacts NO
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Pris (ex. moms) Each
2 093,77 kr
(exkl. moms)
2 617,21 kr
(inkl. moms)
Enheter
Per unit
1 +
2 093,77 kr
Nästa dag-leverans inte möjlig
Related Products
The Telemecanique Sensors XCS-TE series solenoid interlock switch ...
Description:
The Telemecanique Sensors XCS-TE series solenoid interlock switch has a power supply voltage rating of 24VAC/DC. It has 1NO/1NC safety slow break and 1NC auxiliary contacts. The switch is made of plastic housing material and is a power to lock ...
This Escape Release option of TLS GD2 series ...
Description:
This Escape Release option of TLS GD2 series is intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This ...
The XCS LF series of solenoid interlock switches ...
Description:
The XCS LF series of solenoid interlock switches from Schneider offer a wide range of different contact versions for a variety of different guard door protection applications. Each XCS LF unit has a robust design with a high enclosure protection ...
The Bernstein AG SLK series safety interlock switch ...
Description:
The Bernstein AG SLK series safety interlock switch has a supply voltage rating of 24VAC/DC. It has 2NC/2NO contacts. The limit switch has incorporated triple coded anti-tamper mechanism and spring-loaded terminals. Cable entry dimensions are 3 x M20 x 1.5Separate ...