Omron Configurable 24 V dc Safety Relay Dual Channel With 4 Safety Contacts and 1 Auxilary Contact

  • RS-artikelnummer 890-3382
  • Tillv. G9SE-401-DC24
  • Tillverkare / varumärke Omron
Lagstiftning och ursprungsland
COO (Country of Origin): CN

Omron G9SE Safety Relay

The G9SE safety relay from Omron is ideal for a variety of safety input devices such as emergency stop switches, door switches, and light curtains. The screw-less terminals on the front of the G9SE makes installation quick and easy, even in a small control panel where space is limited. Intuitive LED indicators on the safety relay show the operating status of safety inputs and outputs, enabling faster and more accurate troubleshooting when the equipment stops.

Easy and reliable installation and maintenance
Simple wiring using screw-less terminals
Faster troubleshooting with status indicators
Applicable safety standards
OFF-delayed safety output models are also available (stock no. 890-3386 & 890-3395)
Slim design of only 17.5 or 22.5 mm saves space in the control panel


EN ISO 13849-1: PLe/Safety Category 4, IEC 62061: SIL3, EN81-1/-2.



G9SE Compact Safety Relay Model.

Compact. Easy to install. Saves mounting space. Saves on installation cost. Reduced operational cost. Push-In Plus terminal block. (front facing) Easy wiring. (front) Screw-less terminals. 15 ms max response time. Diagnostic indicators. (LED) OFF-delayed safety input models available. 17.5 mm and 22.5 mm widths available. PNP Transistor output. State OFF delay function to PLe.

G9SE-401-DC24 Safety Relay.

Safety output. Instantaneous 4PST-NO (normally open). Auxiliary output 1 x Solid-state. Auxiliary output PNP transistor output load current 100 mA DC max. Rated voltage 24 V dc. Operating voltage range -15% to 10% of rated supply voltage. Rated power consumption 4 W max (loads not included). Safety output – Contact output OFF-delayed safety output 250 V ac, 5 A, 30 V dc, 5 A (resistive load)

Features and Benefits.

Operating time (OFF to ON state) 100 ms Max. (normal operation) Operating time is the time taken for the safety contact to close (after safety inputs and feedback-reset input are turned ON). Bounce time is not included. Response time (ON to OFF state) 15 ms max. Input current 5 mA min. ON voltage 11 V dc max. OFF voltage 5 V dc max. OFF current 1 mA max. Cable length 100 m max. Reset input time 250ms min. Contact resistance 100 mΩ Mechanical durability 5000000 operations per min. Electrical durability 50000 operations min. Minimum applicable load 24 V dc, 4 mA. Over voltage category IEC/EN60664-1, safety output Class III, the others Class II. Protection IP20 Insulation resistance 100 mΩ. Weight 180 g

Applications Include.

Emergency stop switches. Door switches. Light curtains. Safety monitoring applications.

Attribute Value
Supply Voltage 24 V dc
Number of Channels 2
Auxiliary Contacts 1
Function Emergency Stop, Light Beam/Curtain, Safety Switch/Interlock
Safety Contacts 4
Reset Method Automatic, Manual
Terminal Type Screw
Standards Met CAN C22.2 No.14, CSA C22.2 No.14, EN 62061 SIL3, EN 81-1, EN 81-2, EN ISO 13849-1: 2008 PL e Safety Category 4, EN/IEC 60947-5-1, GB 14048.5, IEC 62061 SIL 3, UL508
Depth 111.6mm
Width 22.5mm
Length 144.5mm
23 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 439,00 kr
(exkl. moms)
1 798,75 kr
(inkl. moms)
Per unit
1 +
1 439,00 kr
Related Products
Safety relay for two-handed controlsDuring dangerous movements, the ...
Safety relay for two-handed controlsDuring dangerous movements, the relay requires the operator to keep both hands out of the danger zoneApplications: mechanical presses, hydraulic presses, safety control circuitsRemovable terminals with connection via spring terminalsDisplay LEDs for relay statusDIN rail ...
The G9SA family offers a line-up of compact ...
The G9SA family offers a line-up of compact and expandable safety relay units. Modules with safe OFF-delay timing are available as well as a two hand controller. Simple multiplication of safety contacts is possible by using the connection on the ...
Professional range of IDEM VIPER Safety Relays with ...
Professional range of IDEM VIPER Safety Relays with screw terminals. The safety relays incorporate expansion units. The relays can be directly wired to increase the number of safety output contacts. Designed to meet the latest safety standard and offer enhanced ...
Multi-function safety modules / SRB-E-201ST. STOP 0 Function1 ...
Multi-function safety modules / SRB-E-201ST. STOP 0 Function1 oder 2-channel controlStart button / Auto-startMonitoring two-hand control panels to EN 574 IIIC2 Safety outputs 5.5 A1 Signalling output.